2014 Jeep Patriot User's Guide

2014

Patriot

14MK74-926-AA

Patriot

Fourth Edition

User Guide

Download a FREE electronic copy

of the Owner’s Manual or Warranty Booklet

by visiting the Owners tab at:

www.Jeep.com (U.S.) or

www.Jeep.ca (Canada)

Download a free

Vehicle Information

App by visiting your

application store,

Keyword (Jeep Vehicle

Info), or scanning the

Microsoft Tag. To put

Microsoft Tags to work

for you, use your mobile phone’s browser

or App store to download a Microsoft Tag

reader, like the free one at www.gettag.mobi.

Then follow the directions to scan the code.

Jeep.com

Get the free mobile app for your phone

http://gettag.mobi

U.S. Only

User Guide

1527623_14d_Patriot_UG_091113.indd 1 9/11/13 11:25 AM

The driver’s primary responsibility is the safe operation of the vehicle.

Driving while distracted can result in loss of vehicle control, resulting

in a collision and personal injury. Chrysler Group LLC strongly

recommends that the driver use extreme caution when using any

device or feature that may take their attention o the road. Use of

any electrical devices such as cell phones, computers, portable radios,

vehicle navigation or other devices by the driver while the vehicle is

moving is dangerous and could lead to a serious collision. Texting while

driving is also dangerous and should never be done while the vehicle is

moving. If you ﬁnd yourself unable to devote your full attention to

vehicle operation, pull o the road to a safe location and stop your

vehicle. Some States or Provinces prohibit the use of cellular

telephones or texting while driving. It is always the driver’s

responsibility to comply with all local laws.

WARNING!

Driving after drinking can lead to a collision. Your perceptions are

less sharp, your reﬂexes are slower, and your judgment is impaired

when you have been drinking. Never drink and then drive.

If you are the ﬁrst registered retail owner of

your vehicle, you may obtain a complimentary

printed copy of the Owner’s Manual, Navigation/

Uconnect

Manuals or Warranty Booklet by calling

1-877-426-5337 (U.S.) or 1-800-387-1143 (Canada)

or by contacting your dealer.

This guide has been prepared to help you get quickly

acquainted with your new Jeep and to provide a convenient

reference source for common questions. However, it is not a

substitute for your Owner’s Manual.

For complete operational instructions, maintenance

procedures and important safety messages, please consult

your Owner’s Manual, Navigation/Uconnect

Manuals and

other Warning Labels in your vehicle.

Not all features shown in this guide may apply to your

vehicle. For additional information on accessories to help

personalize your vehicle, visit www.mopar.com (U.S.),

www.mopar.ca (Canada) or your local Jeep dealer.

Important:

This User Guide is intended to familiarize you with the important

features of your vehicle. The DVD enclosed contains your Owner’s

Manual, Navigation/Uconnect

Manuals, Warranty Booklets, Tire

Warranty and Roadside Assistance (new vehicles purchased in the

U.S.) or Roadside Assistance (new vehicles purchased in Canada) in

electronic format. We hope you ﬁnd it useful. Replacement DVD kits may

be purchased by visiting www.techauthority.com. Jeep

is a registered

Driving and Alcohol:

Drunken driving is one of the most frequent causes of collisions. Your

driving ability can be seriously impaired with blood alcohol levels far below

the legal minimum. If you are drinking, don’t drive. Ride with a designated

non-drinking driver, call a cab, a friend, or use public transportation.

1527623_14d_Patriot_UG_091113.indd 2 9/11/13 11:25 AM

INTRODUCTION/WELCOME

WELCOME FROM CHRYSLER

GROUP LLC ..................2

CONTROLS AT A GLANCE

DRIVER COCKPIT ..............6

INSTRUMENT CLUSTER ..........8

GETTING STARTED

KEYFOB ...................10

REMOTE START ...............11

SECURITY ALARM .............11

SEATBELT ..................12

SUPPLEMENTAL RESTRAINT SYSTEM

(SRS) – AIR BAGS .............13

CHILD RESTRAINTS ............14

FRONT SEATS ................18

REAR SEATS ................20

HEATEDSEATS ...............20

TILT STEERING COLUMN ......... 21

OPERATING YOUR VEHICLE

ENGINE BREAK-IN

RECOMMENDATIONS ...........22

TURN SIGNAL/LIGHTS LEVER ......22

WIPER/WASHER LEVER ..........24

SPEED CONTROL ..............25

CONTINUOUSLY VARIABLE AUTOMATIC

TRANSMISSION (CVT) ...........27

SIX-SPEED AUTOMATIC

TRANSMISSION ...............27

MANUAL CLIMATE CONTROLS ......28

AUTOMATIC TEMPERATURE

CONTROLS (ATC) ..............29

POWER SUNROOF .............30

WIND BUFFETING .............31

ELECTRONICS

YOUR VEHICLE'S SOUND SYSTEM . . . 32

Uconnect

130 ...............34

Uconnect

130 WITH SiriusXM

SATELLITE RADIO ..............36

Uconnect

230 ...............39

Uconnect

430/430N ...........42

SiriusXM SATELLITE RADIO/

TRAVELLINK ................52

STEERING WHEEL AUDIO CONTROLS

..56

iPod

/USB/MP3 CONTROL ........ 56

Uconnect

Phone ..............57

Uconnect

VOICE COMMAND .......60

Bluetooth

STREAMING AUDIO .....62

ELECTRONIC VEHICLE INFORMATION

CENTER (EVIC) ...............63

PROGRAMMABLE FEATURES .......63

UNIVERSAL GARAGE DOOR OPENER

(HomeLink

) .................65

POWER INVERTER .............68

POWER OUTLET ..............69

OFF-ROAD CAPABILITIES

FOUR-WHEEL DRIVE OPERATION . . . 70

UTILITY

TRAILER TOWING WEIGHTS (MAXIMUM

TRAILER WEIGHT RATINGS) ....... 72

RECREATIONAL TOWING

(BEHIND MOTORHOME, ETC.) .....72

WHAT TO DO IN EMERGENCIES

ROADSIDE ASSISTANCE ..........73

INSTRUMENT CLUSTER WARNING

LIGHTS ....................73

IF YOUR ENGINE OVERHEATS ......78

AUTOMATIC TRANSMISSION

OVERHEATING ...............78

JACKING AND TIRE CHANGING ..... 79

JUMP-STARTING PROCEDURES .....84

SHIFT LEVER OVERRIDE .........87

TOWING A DISABLED VEHICLE ..... 88

FREEING A STUCK VEHICLE .......89

EVENT DATA RECORDER (EDR) .....90

MAINTAINING YOUR VEHICLE

OPENING THE HOOD ...........91

ENGINE COMPARTMENT .........92

FLUIDS AND CAPACITIES ........ 94

MAINTENANCE SCHEDULE .......95

FUSES ....................100

TIRE PRESSURES .............102

WHEEL AND WHEEL TRIM CARE . . . 103

EXTERIOR BULBS ............ 103

CUSTOMER ASSISTANCE

CHRYSLER GROUP LLC CUSTOMER

CENTER ..................104

CHRYSLER CANADA INC. CUSTOMER

CENTER ..................104

ASSISTANCE FOR THE HEARING

IMPAIRED .................104

PUBLICATIONS ORDERING .......104

REPORTING SAFETY DEFECTS IN THE

UNITEDSTATES ..............105

MOPAR® ACCESSORIES

AUTHENTIC ACCESSORIES

BY MOPAR

................106

INDEX

..................107

FAQ(HowTo?)

FREQUENTLY ASKED QUESTIONS . . . 110

TABLE OF CONTENTS

WELCOME FROM CHRYSLER GROUP LLC

Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it

represents precision workmanship, distinctive styling, and high quality - all essen-

tials that are traditional to our vehicles.

Your new Chrysler Group LLC vehicle has characteristics to enhance the driver's

control under some driving conditions. These are to assist the driver and are never a

substitute for attentive driving. They can never take the driver's place. Always drive

carefully.

Your new vehicle has many features for the comfort and convenience of you and your

passengers. Some of these should not be used when driving because they take your

eyes from the road or your attention from driving. Never text while driving or take your

eyes more than momentarily off the road.

This guide illustrates and describes the operation of features and equipment that are

either standard or optional on this vehicle. This guide may also include a description

of features and equipment that are no longer available or were not ordered on this

vehicle. Please disregard any features and equipment described in this guide that are

not available on this vehicle. Chrysler Group LLC reserves the right to make changes

in design and specifications and/or make additions to or improvements to its

products without imposing any obligation upon itself to install them on products

previously manufactured.

INTRODUCTION/WELCOME

This User Guide has been prepared to help you quickly become acquainted with the

important features of your vehicle. It contains most things you will need to operate

and maintain the vehicle, including emergency information.

The DVD includes a computer application containing detailed owner's information

which can be viewed on a personal computer or MAC computer. The multimedia DVD

also includes videos which can be played on any standard DVD player (including the

Uconnect

Touchscreen Radios). Additional DVD operational information is located

on the back of the DVD sleeve.

For complete owner information, refer to your Owner's Manual on the DVD in the owner’s

kit provided at the time of new vehicle purchase. For your convenience, the information

contained on the DVD may also be printed and saved for future reference.

Chrysler Group LLC is committed to protecting our environment and natural re-

sources. By converting from paper to electronic delivery for the majority of the user

information for your vehicle, together we greatly reduce the demand for tree-based

products and lessen the stress on our environment.

INTRODUCTION/WELCOME

VEHICLES SOLD IN CANADA

With respect to any vehicles sold in Canada, the name Chrysler Group LLC shall be

deemed to be deleted and the name Chrysler Canada Inc. used in substitution.

WARNING!

• Pedals that cannot move freely can cause loss of vehicle control and increase

the risk of serious personal injury.

• Always make sure that objects cannot fall into the driver foot well while the

vehicle is moving. Objects can become trapped under the brake pedal and

accelerator pedal causing a loss of vehicle control.

• Failure to properly follow floor mat installation or mounting can cause inter-

ference with the brake pedal and accelerator pedal operation causing loss of

control of the vehicle.

• Never leave children alone in a vehicle, or with access to an unlocked vehicle.

Allowing children to be in a vehicle unattended is dangerous for a number of

reasons. A child or others could be seriously or fatally injured. Children should

be warned not to touch the parking brake, brake pedal or the shift lever.

• Never use the ‘PARK’ position as a substitute for the parking brake. Always

apply the parking brake fully when parked to guard against vehicle movement

and possible injury or damage.

• Refer to your Owner's Manual on the DVD for further details.

INTRODUCTION/WELCOME

Rollover Warning

WARNING!

• Pedals that cannot move freely can cause loss of vehicle control and increase

the risk of serious personal injury.

• Always make sure that objects cannot fall into the driver foot well while the

vehicle is moving. Objects can become trapped under the brake pedal and

accelerator pedal causing a loss of vehicle control.

• Failure to properly follow floor mat installation or mounting can cause inter-

ference with the brake pedal and accelerator pedal operation causing loss of

control of the vehicle.

• Refer to your Owner's Manual on the DVD for further details.

• Never use the ‘PARK’ position as a substitute for the parking brake. Always

apply the parking brake fully when parked to guard against vehicle movement

and possible injury or damage.

USE OF AFTERMARKET PRODUCTS (ELECTRONICS)

The use of aftermarket devices including cell phones, MP3 players, GPS systems, or

chargers may affect the performance of on-board wireless features including Keyless

Enter-N-Go™ and Remote Start range. If you are experiencing difficulties with any of

your wireless features, try disconnecting your aftermarket devices to see if the

situation improves. If your symptoms persist, please see an authorized dealer.

CHRYSLER, DODGE, JEEP, RAM TRUCK, SRT, ATF+4, MOPAR and Uconnect are

registered trademarks of Chrysler Group LLC.

INTRODUCTION/WELCOME

DRIVER COCKPIT

1. Electronic Vehicle Information Center (EVIC) Controls pg. 63

2. Turn Signal/Lights Lever (behind steering wheel) pg. 22

3. Electronic Vehicle Information Center (EVIC) Display

4. Instrument Cluster pg. 8

5. Speed Control pg. 25

6. Ignition Switch (behind steering wheel)

7. Wiper/Washer Lever pg. 24

8. Audio System pg. 32

9. Automatic Climate Controls pg. 29

10. Storage

CONTROLS AT A GLANCE

11. Glove Compartment

12. Power Outlet pg. 69

13. Shift Lever pg. 27

14. Switch Panel

• Heated Seat Switches pg. 20

• Electronic Stability Control (ESC) OFF pg. 73

• Hazard Switch

15. Tilt Steering Column pg. 21

16. Hood Latch pg. 91

17. Power Windows

18. Power Door Locks

19. Power Mirrors

CONTROLS AT A GLANCE

INSTRUMENT CLUSTER

Warning Lights

- Low Fuel Warning Light

- Charging System Light**

- Oil Pressure Warning Light**

- Anti-Lock Brake (ABS) Light**

- Air Bag Warning Light**

- Electronic Throttle Control (ETC) Light

- Tire Pressure Monitoring System (TPMS) Light

- Engine Temperature Warning Light

- Transmission Temperature Warning Light

- Seat Belt Reminder Light

BRAKE

- Brake Warning Light**

- Malfunction Indicator Light (MIL)**

Electronic Stability Control (ESC) Activation/Malfunction Indicator Light**

4WD!

- 4WD System Fault Indicator Light**

(See page 73 for more information.)

CONTROLS AT A GLANCE

Indicators

- Turn Signal Indicators

- High Beam Indicator

- Front Fog Light Indicator

- Vehicle Security Indicator*

4WD

- 4WD Indicator

- Electronic Stability Control (ESC) Off Indicator

CRUISE

- Speed Control Indicator

- Hill Descent Control Indicator

Odometer Messages

door - Door Ajar LoW tirE - Low Tire Pressure

gATE - GateAjar CHANgE OIL* - Change Engine Oil

gASCAP - Fuel Cap Fault

* If equipped

** Bulb Check with Key On

CONTROLS AT A GLANCE

KEY FOB

Locking And Unlocking The

Doors/Liftgate

• Press the LOCK button once to lock all

the doors and the liftgate. Press the

UNLOCK button once to unlock the

driver’s door only and twice within five

seconds to unlock all the doors and

liftgate.

• All doors can be programmed to un-

lock on the first press of the UNLOCK

button. Refer to “Programmable Fea-

tures” in the “Electronics” section of

this guide.

Panic Alarm

• Press the PANIC button once to turn

the panic alarm on.

• Wait approximately three seconds and

press the button a second time to turn

the panic alarm off.

WARNING!

• When leaving the vehicle, always remove the Key Fob from the ignition and lock

your vehicle.

• Never leave children alone in a vehicle, or with access to an unlocked vehicle.

Allowing children to be in a vehicle unattended is dangerous for a number of

reasons. A child or others could be seriously or fatally injured. Children should

be warned not to touch the parking brake, brake pedal or the shift lever.

• Do not leave the Key Fob in the vehicle, or in a location accessible to children.

A child could operate power windows, other controls, or move the vehicle.

1 — Liftgate

2 — UnLock

3 — Lock

4 — Remote Start

GETTING STARTED

REMOTE START

NOTE:

The vehicle must be equipped with an automatic transmission to be equipped with

Remote Start.

• Press the REMOTE START button

on the Key Fob twice within five seconds.

Pressing the REMOTE START button a third time shuts the engine off.

• To drive the vehicle, press the UNLOCK button, insert the key in the ignition and

turn to the ON/RUN position.

• With remote start, the engine will only run for 15 minutes (timeout) unless the

ignition key is placed in the ON/RUN position.

• The vehicle must be started with the key after two consecutive timeouts.

WARNING!

• Do not start or run an engine in a closed garage or confined area. Exhaust gas

contains Carbon Monoxide (CO) which is odorless and colorless. Carbon

Monoxide is poisonous and can cause serious injury or death when inhaled.

• Keep Key Fob transmitters away from children. Operation of the Remote Start

System, windows, door locks or other controls could cause serious injury or

death.

SECURITY ALARM

To Arm:

• Lock the door using either the power door lock switch (one door must be open) or

the LOCK button on the Remote Keyless Entry (RKE) transmitter (doors can be

open or closed), and close all doors.

NOTE:

The Vehicle Security Alarm will not arm if you lock the doors with the manual door

lock plungers.

• The Vehicle Security Light in the instrument cluster will flash for 16 seconds. This

shows that the Vehicle Security Alarm is arming. During this period, if a door is

opened, the ignition is cycled to ON/RUN, or the power door locks are unlocked in

any manner, the Vehicle Security Alarm will automatically disarm.

NOTE:

• During the 16-second arming period, if a door is opened or the ignition is cycled

to ON/RUN, the Vehicle Security Alarm will automatically disarm.

• Once armed, the Vehicle Security Alarm disables the unlock switch on the driver

door trim panel and passenger door trim panel.

GETTING STARTED

To Disarm The System:

• Press the Key Fob UNLOCK button or cycle the ignition to the ON/START position.

• The Vehicle Security Alarm is designed to protect your vehicle; however, you can

create conditions where the Vehicle Security Alarm will give you a false alarm. If

one of the previously described arming sequences has occurred, the Vehicle

Security Alarm will arm regardless of whether you are in the vehicle or not. If you

remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm

the Vehicle Security Alarm.

• If the Vehicle Security Alarm is armed and the battery becomes disconnected the

Vehicle Security Alarm will remain armed when the battery is reconnected. The

exterior lights will flash, and the horn will sound. If this occurs, disarm the Vehicle

Security Alarm.

SEAT BELT

• Be sure everyone in your vehicle is in a seat and using a seat belt properly.

• Position the lap belt across your thighs, below your abdomen. To remove slack in

the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too

tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of

sliding under the belt in a collision.

• Position the shoulder belt on your chest so that it is comfortable and not resting

on your neck. The retractor will withdraw any slack in the belt.

• A shoulder belt placed behind you will not protect you from injury during a

collision. You are more likely to hit your head in a collision if you do not wear your

shoulder belt. The lap and shoulder belt are meant to be used together.

•

A belt that is too loose will not protect you properly. In a sudden stop you could move

too far forward, increasing the possibility of injury. Wear your seat belt snugly.

• A frayed or torn belt could rip apart in a collision and leave you with no protection.

Inspect the belt system periodically, checking for cuts, frays, or loose parts.

Damaged parts must be replaced immediately. Do not disassemble or modify the

system. Seat belt assemblies must be replaced after a collision if they have been

damaged (bent retractor, torn webbing, etc.).

•

The seat belts for both front seating positions are equipped with pretensioning devices

that are designed to remove slack from the seat belt in the event of a collision.

• A deployed pretensioner or a deployed air bag must be replaced immediately.

WARNING!

In a collision, you and your passengers can suffer much greater injuries if you are

not buckled up properly. You can strike the interior of your vehicle or other

passengers, or you can be thrown out of the vehicle. Always be sure you and others

in your vehicle are buckled up properly.

GETTING STARTED

SUPPLEMENTAL RESTRAINT SYSTEM (SRS) – AIR BAGS

• This vehicle has Advanced Front Air Bags for both the driver and right front

passenger as a supplement to the seat belt restraint system. The Advanced Front

Air Bags will not deploy in every type of collision.

• Advanced Front Air Bags are designed to provide additional protection by

supplementing the seat belts in certain frontal collisions depending on several

factors, including the severity and type of collision. Advanced Front Air Bags are

not expected to reduce the risk of injury in rear, side, or rollover collisions.

• This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains to

protect the driver, front and rear passengers sitting next to a window.

• This vehicle may be equipped with Supplemental Seat-Mounted Side Air Bags to

provide enhanced protection to help protect an occupant during a side impact.

• If the Air Bag Warning Light

is not on during starting, stays on, or turns on while

driving, have the vehicle serviced by an authorized service center immediately.

• Refer to the Owner's Manual on the DVD for further details regarding the

Supplemental Restraint System (SRS).

WARNING!

• Relying on the air bags alone could lead to more severe injuries in a collision.

The air bags work with your seat belt to restrain you properly. In some

collisions, the air bags won’t deploy at all. Always wear your seat belts even

though you have air bags.

• Being too close to the steering wheel or instrument panel during Advanced

Front Air Bag deployment could cause serious injury, including death. Air bags

need room to inflate. Sit back, comfortably extending your arms to reach the

steering wheel or instrument panel.

• Being too close to the Supplemental Side Air Bag Inflation Curtain and/or

Seat-Mounted Side Air Bag during deployment could cause you to be severely

injured or killed.

• Supplemental Side Air bag Inflatable Curtains and Supplemental Seat-

Mounted Side Air Bags need room to inflate. Do not lean against the door or

window. Sit upright in the center of the seat.

• Do not drive your vehicle after the air bags have deployed. If you are involved

in another collision, the air bags will not be in place to protect you.

• After any collision, the vehicle should be taken to an authorized dealer

immediately.

GETTING STARTED

CHILD RESTRAINTS

• Children 12 years or younger should ride properly buckled up in a rear seat, if

available. According to crash statistics, children are safer when properly restrained

in the rear seats rather than in the front.

• Every state in the United States and all Canadian provinces require that small

children ride in proper restraint systems. This is the law, and you can be

prosecuted for ignoring it.

NOTE:

•

For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK

(1–866–732–8243).

•

Canadian residents, should refer to Transport Canada’s website for additional informa-

tion: http://www.tc.gc.ca/eng/roadsafety/safedrivers-childsafety-index-53.htm

LATCH — Lower Anchors And Tethers For CHildren

• Your vehicle is equipped with the child restraint anchorage system called LATCH,

which stands for Lower Anchors and Tethers for CHildren.

• The rear outboard seating positions have lower anchors and top tether anchors.

The rear center seating position has a top tether anchor only.

• You may use the LATCH anchorage

system until the combined weight of

the child and the child restraint is

65 lbs (29.5 kg). Use the seat belt and

tether anchor instead of the LATCH

system once the combined weight is

more than 65 lbs (29.5 kg).

•

The lower anchorages are round

bars that are found at the rear of the

seat cushion where it meets the seat-

back. They are just visible when you

lean into the rear seat to install the

child restraint. You will easily feel them if you run your finger along the gap

between the seatback and seat cushion.

GETTING STARTED

• In addition, there are tether strap anchorages behind each rear seating

position located on the back of the seat.

•

Do not install child restraints with rigid

lower attachments in the center seating

position. Only install this type of child

restraint in the outboard seating posi-

tions. Child restraints with flexible, web-

bing mounted lower attachments can be

installed in any rear seating position. In

the center position, the inner anchor-

ages are 15.3 inches (390 mm) apart.

Installing The Child Restraint Using The LATCH Lower Anchors

NOTE:

Never “share” a LATCH anchorage with two or more child restraints.

1. Loosen the adjusters on the lower straps and on the tether strap of the child seat

so that you can more easily attach the hooks or connectors to the vehicle

anchorages.

2. Attach the lower hooks or connectors of the child restraint to the lower anchorages

in the selected seating position.

3. If the child restraint has a tether strap, connect it to the top tether anchorage.

See below for directions to attach a tether anchor.

4. Tighten all of the straps as you push the child restraint rearward and downward

into the seat. Remove slack in the straps according to the child restraint

manufacturer’s instructions.

5. Test that the child restraint is installed tightly by pulling back and forth on the

child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any

direction.

GETTING STARTED

Installing The Child Restraint Using The Vehicle Seat Belts

• The seat belts in the passenger seating positions are equipped with a Switchable

Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the

seat belt tight around the child restraint. Any seat belt system will loosen with

time, so check the belt occasionally, and pull it tight if necessary.

• Always use the tether anchor when using the seat belt to install a forward facing

child restraint, up to the recommended weight limit of the child restraint.

To Install A Child Seat Using An ALR:

1. Pull enough of the seat belt webbing from the retractor to pass it through the belt

path of the child restraint. Do not twist the belt webbing in the belt path.

2. Slide the latch plate into the buckle until you hear a “click.”

3. Pull on the webbing to make the lap portion tight against the child seat.

4. To lock the seat belt, pull down on the shoulder part of the belt until you have

pulled all the seat belt webbing out of the retractor. Then, allow the webbing to

retract back into the retractor. As the webbing retracts, you will hear a clicking

sound. This means the seat belt is now in the Automatic Locking mode.

5. Try to pull the webbing out of the retractor. If it is locked, you should not be able

to pull out any webbing. If the retractor is not locked, repeat the last step.

6. Finally, pull up on any extra webbing to tighten the lap portion around the child

restraint while you push the child restraint rearward and downward into the

vehicle seat.

7. If the child restraint has a top tether strap and the seating position has a top tether

anchorage, connect the tether strap to the anchorage and tighten the tether strap.

See below for directions to attach a tether anchor.

8. Test that the child restraint is installed tightly by pulling back and forth on the

child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any

direction.

GETTING STARTED

Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle Seat Belt):

• When installing a forward-facing child restraint, always secure the top tether

strap, up to the tether anchor weight limit, whether the child restraint is installed

with the lower anchors or the vehicle seat belt.

1. Route the tether strap to provide the most direct path for the strap between the

anchor and the child seat, routing it over the center of the head restraint.

2. Attach the tether strap hook of the child restraint to the top tether anchorage and

remove slack in the tether strap according to the child restraint manufacturer’s

instructions.

WARNING!

• In a collision, an unrestrained child, even a tiny baby, can become a projectile

inside the vehicle. The force required to hold even an infant on your lap could

become so great that you could not hold the child, no matter how strong you

are. The child and others could be severely injured or killed. Any child riding in

your vehicle should be in a proper restraint for the child's size.

• Rearward-facing child seats must never be used in the front seat of a vehicle

with a front passenger air bag. An air bag deployment could cause severe injury

or death to infants in this position.

• Only use a rearward-facing child restraint in a vehicle with a rear seat.

• Improper installation of a child restraint to the LATCH anchorages can lead to

failure of an infant or child restraint. The child could be severely injured or

killed. Follow the manufacturer’s directions exactly when installing an infant or

child restraint.

• An incorrectly anchored tether strap could lead to increased head motion and

possible injury to the child. Use only the anchor positions directly behind the

child seat to secure a child restraint top tether strap.

• If your vehicle is equipped with a split rear seat, make sure the tether strap

does not slip into the opening between the seatbacks as you remove slack in

the strap.

GETTING STARTED

FRONT SEATS

Power Seats

• The power seat switch is located on

the outboard side of the seat near the

floor. Use the switch to move the seat

up, down, forward, rearward, or to tilt

the seat.

Manual Seat Adjustment

Forward/Rearward

• Lift up on the adjusting bar located at

the front of the seat near the floor and

release it when the seat is at the de-

sired position. Then, using body pres-

sure, move forward and backward on

the seat to be sure that the seat adjust-

ers have latched.

Recliner

• Lift the recliner handle located on the

outboard side of the seat, lean back

and release at the desired position.

Driver’s Seat Height Adjustment

• The height adjustment lever is located

on the outboard side of the seat. Raise

the lever to raise the seat. Lower the

lever to lower the seat.

Lumbar Support

• The lumbar lever is on the outboard

side of the seatback. Rotate the lum-

bar lever downward to increase the

lumbar support or upward to decrease the lumbar support as desired.

GETTING STARTED

Fold-Flat Front Passenger Seat

• The front passenger seat can be folded

flat. Pull up on the recliner handle, to

the full upward position, to fold down

the seatback.

CAUTION!

Do not place any article under a power seat or impede its ability to move as it may

cause damage to the seat controls. Seat travel may become limited if movement

is stopped by an obstruction in the seat’s path.

WARNING!

• Adjusting a seat while the vehicle is moving is dangerous. The sudden

movement of the seat could cause you to lose control. The seat belt might not

be properly adjusted, and you could be severely injured or killed. Only adjust a

seat while the vehicle is parked.

• Do not ride with the seatback reclined so that the seat belt is no longer resting

against your chest. In a collision, you could slide under the seat belt and be

severely injured or killed. Use the recliner only when the vehicle is parked.

GETTING STARTED

REAR SEATS

Folding Rear Seatback

• To fold each rear seatback, pull the

strap forward to move the seatback

forward and flat.

Reclining Rear Seatback

• To recline each rear seatback, pull the

strap forward just enough to release

the seatback latch. Then push the

seatback to a reclined position, ap-

proximately 35 degrees maximum, and

release the strap.

WARNING!

Be certain that the seatback is securely locked into position. If the seatback is not

securely locked into position, the seat will not provide the proper stability for child

seats and/or passengers. An improperly latched seat could cause serious injury.

HEATED SEATS

Front Heated Seats

• The controls for the front heated seats

are located on the center instrument

panel area.

• Press the switch once to select High-

level heating. Press the switch a sec-

ond time to select Low-level heating.

Press the switch a third time to shut

the heating elements Off.

• If the High-level setting is selected,

the system will automatically switch to

Low-level after approximately 60 min-

utes. The Low-level setting will turn

Off automatically after approximately 45 minutes.

GETTING STARTED

WARNING!

• Persons who are unable to feel pain to the skin because of advanced age,

chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus-

tion or other physical conditions must exercise care when using the seat heater.

It may cause burns even at low temperatures, especially if used for long periods

of time.

• Do not place anything on the seat that insulates against heat, such as a blanket

or cushion. This may cause the seat heater to overheat. Sitting in a seat that

has been overheated could cause serious burns due to the increased surface

temperature of the seat.

TILT STEERING COLUMN

• The tilt lever is located on the steering

column, below the turn signal lever.

• Push down on the lever to unlock the

steering column.

• With one hand firmly on the steering

wheel, move the steering column up or

down as desired.

• Pull upward on the lever to lock the

column firmly in place.

WARNING!

Do not adjust the steering column while driving. Adjusting the steering column

while driving, or driving with the steering column unlocked, could cause the driver

to lose control of the vehicle. Be sure the steering column is locked before driving

your vehicle. Failure to follow this warning may result in severe injury or death.

GETTING STARTED

ENGINE BREAK-IN RECOMMENDATIONS

• A long break-in period is not required for the engine and drivetrain (transmission

and axle) in your vehicle.

• Drive moderately during the first 300 miles (500 km). After the initial 60 miles

(100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.

• While cruising, brief full-throttle acceleration within the limits of local traffic laws

contributes to a good break-in. Wide-open throttle acceleration in low gear can be

detrimental and should be avoided.

• The engine oil installed in the engine at the factory is a high-quality energy

conserving type lubricant. Oil changes should be consistent with anticipated

climate conditions under which vehicle operations will occur. For the recom-

mended viscosity and quality grades, refer to “Maintaining Your Vehicle.”

NOTE:

A new engine may consume some oil during its first few thousand miles (kilome-

ters) of operation. This should be considered a normal part of the break-in and not

interpreted as an indication of an engine problem or malfunction.

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may

result.

TURN SIGNAL/LIGHTS LEVER

Headlights/Parking Lights

• Rotate the end of the lever to the first detent for parking lights and to the

second detent for headlights

OPERATING YOUR VEHICLE

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim

the instrument panel lights and prevent the interior lights from illuminating when

a door is opened.

• Rotate the center portion of the lever up to increase the brightness of the

instrument panel lights when the parking lights or headlights are on.

•

Rotate the center portion of the lever upward to the next detent position to brighten

the odometer and radio controls when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the last detent to turn on the

interior lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain

on until the lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE:

For safe driving, turn off the high beams when oncoming traffic is present to prevent

headlight glare and as a courtesy to other motorists.

Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

Turn Signals/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three

times and automatically turn off.

OPERATING YOUR VEHICLE

WIPER/WASHER LEVER

Front Wipers

Intermittent, Low And High Operation

• Rotate the end of the lever to the first detent position for one of five intermittent

settings, the second detent for low wiper operation and the third detent for high

wiper operation.

Washer Operation

• Pull the lever toward you and hold for as long as spray is desired.

Mist

• Pull down on the lever and release when a single wipe is desired.

NOTE:

The mist feature does not activate the washer pump; therefore, no washer fluid will

be sprayed on the windshield. The wash function must be activated in order to spray

the windshield with washer fluid.

Rear Wiper

Wiper Operation

• Rotate the center portion of the lever forward to the first detent for rear wiper

operation.

Washer Operation

• Rotate the center portion of the lever past the first detent to activate the rear

washer.

OPERATING YOUR VEHICLE

SPEED CONTROL

• The Speed Control switches are located on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate

the Speed Control.

• CRUISE

will appear on the instru-

ment cluster to indicate the Speed

Control is on.

• Push the ON/OFF button a second

time to turn the system off.

SET

• With the Speed Control on, push and

release the SET – button to set a de-

sired speed.

Accel/Decel

To Increase Speed

• When the Electronic Speed Control is set, you can increase speed by pushing the

RES + button.

• The speed increment shown is dependant on the speed of U.S. (mph) or Metric

(km/h) units:

U.S. Speed (mph)

• Pressing the RES + button once will result in a 1 mph increase in set speed.

Each subsequent tap of the button results in an increase of 1 mph.

• If the button is continually pressed, the set speed will continue to increase until

the button is released, then the new set speed will be established.

Metric Speed (km/h)

• Pressing the RES + button once will result in a 2 km/h increase in set speed.

Each subsequent tap of the button results in an increase of 2 km/h.

• If the button is continually pressed, the set speed will continue to increase until

the button is released, then the new set speed will be established.

OPERATING YOUR VEHICLE

To Decrease Speed

• When the Electronic Speed Control is set, you can decrease speed by pushing the

SET - button.

• The speed decrement shown is dependant on the speed of U.S. (mph) or Metric

(km/h) units:

U.S. Speed (mph)

• Pressing the SET - button once will result in a 1 mph decrease in set speed.

Each subsequent tap of the button results in a decrease of 1 mph.

• If the button is continually pressed, the set speed will continue to decrease until

the button is released, then the new set speed will be established.

Metric Speed (km/h)

• Pressing the SET - button once will result in a 2 km/h decrease in set speed.

Each subsequent tap of the button results in a decrease of 2 km/h.

• If the button is continually pressed, the set speed will continue to decrease until

the button is released, then the new set speed will be established.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and

maintain the set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

WARNING!

• Leaving the Electronic Speed Control system on when not in use is dangerous.

You could accidentally set the system or cause it to go faster than you want. You

could lose control and have a collision. Always leave the Electronic Speed

Control system off when you are not using it.

• Electronic Speed Control can be dangerous where the system cannot maintain

a constant speed. Your vehicle could go too fast for the conditions, and you

could lose control. A collision could be the result. Do not use Electronic Speed

Control in heavy traffic or on roads that are winding, icy, snow-covered or

slippery.

OPERATING YOUR VEHICLE

CONTINUOUSLY VARIABLE AUTOMATIC

TRANSMISSION (CVT)

•

While conventional automatic transmissions typically have 4, 5 or 6 speeds, the

Continuously Variable Transmission (CVT) has an infinite number of speeds. This allows

it to adjust to exactly the right ratio to optimize performance and fuel economy.

• Under hard acceleration, you may hear more engine noise than with a conven-

tional transmission. The CVT may also occasionally feel like it is “shifting.” These

characteristics are perfectly normal and contribute to the CVT's efficiency.

SIX-SPEED AUTOMATIC TRANSMISSION

• This electronically-controlled transmission provides a precise shift schedule. The

transmission electronics are self-calibrating; therefore, the first few shifts on a

new vehicle may be somewhat abrupt. This is a normal condition, and precision

shifts will develop within a few hundred miles (kilometers).

• The transmission shift lever has only PARK, REVERSE, NEUTRAL, and DRIVE

shift positions. Manual shifts can be made using the Autostick

shift control.

Moving the shift lever to the left or right (-/+) while in the DRIVE position will

manually select the transmission gear, and will display the current gear in the

instrument cluster as 6, 5, 4, 3, 2, 1.

• Refer to your Owner’s Manual on the DVD for further information.

OPERATING YOUR VEHICLE

MANUAL CLIMATE CONTROLS

Air Recirculation

• Use Recirculation for maximum A/C operation.

• For window defogging, turn the Recirculation button off.

• Recirculation is allowed in floor mode and defrost/floor (mix mode) for approxi-

mately five minutes.

Heated Mirrors

• The exterior mirrors are heated to melt frost or ice. This feature is activated

whenever you turn on the rear window defroster.

OPERATING YOUR VEHICLE

AUTOMATIC TEMPERATURE CONTROLS (ATC)

Automatic Operation

• Turn the Mode and Blower Controls to the AUTO position.

• Select the desired temperature by rotating the Temperature Control.

• The system will maintain the set temperature automatically.

Air Conditioning (A/C)

• If the air conditioning button is pressed while in AUTO mode, the system will exit

AUTO mode and stay in A/C. The mode and blower will go to the previous user

setting.

Air Recirculation

• Use Recirculation for maximum A/C operation.

• For window defogging, turn the Recirculation button off.

• If the Recirculation button is pressed while in the AUTO mode, the indicator light

may flash three times to indicate the cabin air is being controlled automatically.

Heated Mirrors

• The exterior mirrors are heated to melt frost or ice. This feature is activated

whenever you turn on the rear window defroster.

OPERATING YOUR VEHICLE

POWER SUNROOF

• The power sunroof switch is located on the overhead console.

Opening Sunroof

Express Open

• Press the switch rearward and release it within one-half second. The sunroof will

fully open and stop automatically.

Manual Open

• Press and hold the switch rearward to open the sunroof. Any release of the switch

will stop the movement, and the sunroof will remain in a partially open position

until the switch is pressed again.

Venting Sunroof

• Press and release the button and the sunroof will open to the vent position. This

is called “Express Vent” and will occur regardless of sunroof position. During

Express Vent operation, any movement of the switch will stop the sunroof.

Closing Sunroof

Express Closing

• Press the switch forward and release it within one-half second. The sunroof will

fully close automatically from any position.

Manual Closing

• Press and hold the switch forward to close the sunroof. Any release of the switch

will stop the movement, and the sunroof will remain in a partially closed position

until the switch is pressed again.

OPERATING YOUR VEHICLE

Pinch Protection Feature

• This feature will detect an obstruction in the opening of the sunroof during

Express Close operation. If an obstruction in the path of the sunroof is detected,

the sunroof will automatically retract. Remove the obstruction if this occurs. Next,

press the switch forward and release to Express Close.

NOTE:

If three consecutive sunroof close attempts result in Pinch Protect reversals, the

fourth close attempt will be a Manual Close movement with Pinch Protect disabled.

WARNING!

• Never leave children unattended in a vehicle, and do not leave the Key Fob in

or near the vehicle, and do not leave a vehicle equipped with Keyless

Enter-N-Go™ in the ACC or ON/RUN mode. Occupants, particularly unat-

tended children, can become entrapped by the power sunroof while operating

the power sunroof switch. Such entrapment may result in serious injury or

death.

• In a collision, there is a greater risk of being thrown from a vehicle with an open

sunroof. You could also be severely injured or killed. Always fasten your seat

belt properly and make sure all passengers are properly secured.

• Do not allow small children to operate the sunroof. Never allow your fingers,

other body parts, or any object to project through the sunroof opening. Injury

may result.

WIND BUFFETING

• Wind buffeting can be described as a helicopter-type percussion sound. If

buffeting occurs with the rear windows open, adjust the front and rear windows

together.

• If buffeting occurs with the sunroof open, adjust the sunroof opening, or adjust

any window. This will minimize buffeting.

OPERATING YOUR VEHICLE

YOUR VEHICLE'S SOUND SYSTEM

1. Uconnect

Voice Command Button pg. 60

2. Uconnect

Phone Button pg. 57

3. Steering Wheel Audio Controls (Right) pg. 56

4. Steering Wheel Audio Controls (Left) pg. 56

ELECTRONICS

5. USB Port on Radio pg. 46

6. Audio Jack pg. 42

7. Front Power Outlet pg. 69

8. USB Port (inside glove box) pg. 56

ELECTRONICS

Uconnect® 130

NOTE:

Your radio has many features that add to the comfort and convenience of you and your

passengers. Some of these radio features should not be used when driving because

they take your eyes from the road or your attention from driving.

Clock Setting

• Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL

control knob to set the hours.

• Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the

TUNE/SCROLL control knob to set the minutes.

• Press the TUNE/SCROLL control knob to save the time change.

• To exit, press any button/knob or wait five seconds.

Equalizer, Balance And Fade

• Press the TUNE/SCROLL control knob and “BASS” will display. Rotate the

TUNE/SCROLL control knob to select the desired setting. Subsequent presses of

the TUNE/SCROLL control knob will display, “MID RANGE.” “TREBLE,”

“BALANCE” and “FADE.”

ELECTRONICS

Radio Operation

Seek Up/Down Buttons

• Press to seek through radio stations in AM or FM bands.

• Hold either button to bypass stations without stopping.

Store Radio Presets

• Press the SET/RND or SET (depending on the radio) button once and SET 1 will

show in the display. Then select button (1–6).

• A second station may be added to each push button. Press the SET/RND or SET

(depending on the radio) button twice and SET 2 will show in the display. Then

select button (1–6).

CD/DISC Operation

Seek Up/Down Buttons

• Press to seek through CD tracks.

• Hold either button to bypass tracks without stopping.

SET/RND or RND (Depending On Radio) Button (Random Play)

• Press this button while the CD is playing to activate Random Play.

• This feature plays the selections on the CD in random order to provide an

interesting change of pace.

Audio Jack Operation

• The AUX/Audio Jack provides a means to connect a portable audio device, such as

an MP3 player or an iPod

, to the vehicle’s sound system. This requires the use of

a 3.5 mm stereo audio patch cable.

• Pressing the AUX button will change the mode to auxiliary device if the Audio Jack

is connected, allowing the music from your portable device to play through the

vehicle's speakers.

• The functions of the portable device are controlled using the device buttons, not

the buttons on the radio. However, the volume may be controlled using the radio or

portable device.

ELECTRONICS

Uconnect® 130 WITH SiriusXM SATELLITE RADIO

NOTE:

• Your radio may not be equipped with the Uconnect

Voice Command and

Uconnect

Phone features. To determine if your radio has these features, press the

Voice Command button on the radio. You will hear a voice prompt if you have the

feature, or see a message on the radio stating “Uconnect Phone not available” if

you do not.

• Your radio has many features that add to the comfort and convenience of you and

your passengers. Some of these radio features should not be used when driving

because they take your eyes from the road or your attention from driving.

Clock Setting

• Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL

control knob to set the hours.

• Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the

TUNE/SCROLL control knob to set the minutes.

• Press the TUNE/SCROLL control knob to save the time change.

• To exit, press any button/knob or wait five seconds.

ELECTRONICS

Equalizer, Balance And Fade

• Press the TUNE/SCROLL control knob and “BASS” will display. Rotate the

TUNE/SCROLL control knob to select the desired setting. Subsequent presses of

the TUNE/SCROLL control knob will display, “MID RANGE.” “TREBLE,”

“BALANCE” and “FADE.”

Radio Operation

Seek Up/Down Buttons

• Press to seek through radio stations in AM, FM, or SAT bands.

• Hold either button to bypass stations without stopping.

Store Radio Presets

• Press the SET/RND or SET (depending on the radio) button once and SET 1 will

show in the display. Then select button (1–6).

• A second station may be added to each push button. Press the SET/RND or SET

(depending on the radio) button twice and SET 2 will show in the display. Then

select button (1–6).

Music Type

NOTE:

The Music Type function only operates when in FM mode.

• Press the MUSIC TYPE button to activate this mode. Press the MUSIC TYPE

button again or turn the TUNE/SCROLL control knob to select the desired music

type (Adult Hits, Country, Jazz, Oldies, Rock, etc.).

• When a music type is chosen and the Music type is displayed, press either SEEK

button and the radio will only search for stations with the selected music type.

SETUP Button

• Pressing the SETUP button allows you to select between items that are available

in that particular mode.

• Turn the TUNE/SCROLL control knob to scroll through the entries. Push the

AUDIO/SELECT button to select an entry and make changes.

ELECTRONICS

SiriusXM Satellite Radio

•

SiriusXM services require subscriptions, sold separately after the 12-month trial

included with the new vehicle purchase.

If you decide to continue your service at the

end of your trial subscription, the plan you choose will automatically renew and bill at

then-current rates until you call SiriusXM at 1-866-635-2349 to cancel.

See SiriusXM

Customer Agreement for complete terms at http://www.siriusxm.com. All fees and

programming subject to change. Our satellite service is available only to those at least

18 and older in the 48 contiguous USA and D.C. Our Sirius satellite service is also

available in PR (with coverage limitations). Our Internet radio service is available

Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.

•

SiriusXM Satellite Radio gives you over 130 channels, including 100% commercial-

free music from nearly every genre, plus all your favorite sports, news, talk and

entertainment channels–all with crystal clear, coast-to-coast coverage, all in one

place and all at your fingertips.

• To access SiriusXM Satellite Radio, press the SAT hard-key.

CD/DISC Operation

Seek Up/Down Buttons

• Press to seek through CD tracks.

• Hold either button to bypass tracks without stopping.

SET/RND or RND (Depending On Radio) Button (Random Play)

• Press this button while the CD is playing to activate Random Play.

• This feature plays the selections on the CD in random order to provide an

interesting change of pace.

LIST Button

• Press the LIST button to bring up a list of all folders on the CD. Scroll up or down

the list by turning the TUNE/SCROLL control knob.

• To select a folder from the list, press the TUNE/SCROLL control knob and the

radio will begin playing the files contained in that folder.

Audio Jack Operation

• The AUX/Audio Jack provides a means to connect a portable audio device, such as

an MP3 player or an iPod

, to the vehicle’s sound system. This requires the use of

a 3.5 mm stereo audio patch cable.

• Pressing the AUX button will change the mode to auxiliary device if the Audio Jack

is connected, allowing the music from your portable device to play through the

vehicle's speakers.

• The functions of the portable device are controlled using the device buttons, not

the buttons on the radio. However, the volume may be controlled using the radio or

portable device.

ELECTRONICS

Uconnect® 230

NOTE:

•

Your radio may not be equipped with the Uconnect

Voice Command and Uconnect

Phone features. To determine if your radio has these features, press the Voice Command

button on the radio. You will hear a voice prompt if you have the feature, or see a

message on the radio stating “Uconnect Phone not available” if you do not.

• Your radio has many features that add to the comfort and convenience of you and

your passengers. Some of these radio features should not be used when driving

because they take your eyes from the road or your attention from driving.

Clock Setting

• Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL

control knob to set the hours.

• Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the

TUNE/SCROLL control knob to set the minutes.

• Press the TUNE/SCROLL control knob to save the time change.

• To exit, press any button/knob or wait five seconds.

Equalizer, Balance And Fade

• Press the TUNE/SCROLL control knob and “BASS” will display. Rotate the

TUNE/SCROLL control knob to select the desired setting. Subsequent presses of

the TUNE/SCROLL control knob will display, “MID RANGE.” “TREBLE,”

“BALANCE” and “FADE.”

ELECTRONICS

Radio Operation

Seek Up/Down Buttons

• Press to seek through radio stations in AM, FM, or SAT bands.

• Hold either button to bypass stations without stopping.

Store Radio Presets

• Press the SET button once and SET 1 will show in the display. Then select

button (1–6).

• A second station may be added to each push button. Press the SET button twice

and SET 2 will show in the display. Then select button (1–6).

Music Type

NOTE:

The Music Type function only operates when in FM mode.

• Press the MUSIC TYPE button to activate this mode. Press the MUSIC TYPE

button again or turn the TUNE/SCROLL control knob to select the desired music

type (Adult Hits, Country, Jazz, Oldies, Rock, etc.).

• Once a music type is chosen and the music type is displayed, press the SEEK

button and the radio will only search for stations with the selected music type.

SETUP Button

• Pressing the SETUP button allows you to select between items that are available

in that particular mode.

• Turn the TUNE/SCROLL control knob to scroll through the entries. Push the

AUDIO/SELECT button to select an entry and make changes.

SiriusXM Satellite Radio

• SiriusXM services require subscriptions, sold separately after the 12-month trial

included with the new vehicle purchase. If you decide to continue your service at the

end of your trial subscription, the plan you choose will automatically renew and bill at

then-current rates until you call SiriusXM at 1-866-635-2349 to cancel. See SiriusXM

Customer Agreement for complete terms at http://www.siriusxm.com. All fees and

programming subject to change. Our satellite service is available only to those at

least 18 and older in the 48 contiguous USA and D.C. Our Sirius satellite service

is also available in PR (with coverage limitations). Our Internet radio service is

Radio Inc. Sirius, XM and all related marks and logos are trademarks of Sirius XM

Radio Inc.

• SiriusXM Satellite Radio gives you over 130 channels, including 100%

commercial-free music from nearly every genre, plus all your favorite sports, news,

talk and entertainment channels–all with crystal clear, coast-to-coast coverage, all

in one place and all at your fingertips.

• To access SiriusXM Satellite Radio, press the SAT hard-key.

ELECTRONICS

CD/DISC Operation

Seek Up/Down Buttons

• Press to seek through CD tracks.

• Hold either button to bypass tracks without stopping.

LIST Button

• Press the LIST button to bring up a list of all folders on the CD. Scroll up or down

the list by turning the TUNE/SCROLL control knob.

• To select a folder from the list, press the TUNE/SCROLL control knob and the

radio will begin playing the files contained in that folder.

How To Load Multiple CDs/DVDs

• Press the LOAD button and then press the button with the corresponding number

(1–6) where the CD is being loaded. The radio will display “PLEASE WAIT” and

prompt when to “INSERT DISC.”

• After the radio displays “INSERT DISC,” insert the CD into the player. The radio

display will show “LOADING DISC” when the disc is loading and “READING

DISC” when the radio is reading the disc.

• Press the eject button and then the corresponding number (1–6) to eject the

desired disc.

Audio Jack Operation

• The AUX/Audio Jack provides a means to connect a portable audio device, such as

an MP3 player or an iPod

, to the vehicle’s sound system. This requires the use of

a 3.5 mm stereo audio patch cable.

• Pressing the AUX button will change the mode to auxiliary device if the Audio Jack

is connected, allowing the music from your portable device to play through the

vehicle's speakers.

• The functions of the portable device are controlled using the device buttons, not

the buttons on the radio. However, the volume may be controlled using the radio or

portable device.

ELECTRONICS

Uconnect® 430/430N

NOTE:

• Your radio may not be equipped with the Uconnect

Voice Command and

Uconnect

Phone features. To determine if your radio has these features, press the

Voice Command button on the radio. You will hear a voice prompt if you have the

feature, or see a message on the radio stating “Uconnect Phone not available” if

you do not.

• Your radio has many features that add to the comfort and convenience of you and

your passengers. Some of these radio features should not be used when driving

because they take your eyes from the road or your attention from driving.

Clock Setting

• Turn the radio on, then touch the screen where the time is displayed.

• Touch the “User Clock” soft-key (Navigation radio only).

• To adjust the hours, touch either the “Hour Forward” or “Hour Backward” soft-key.

• To adjust the minutes, touch either the “Minute Forward” or “Minute Backward”

soft-key.

• To save the new time setting, touch the screen where the word “Save” is displayed.

ELECTRONICS

• Press the MENU hard-key to access the System Setup menu and the My Files

menu.

• Press the MENU hard-key in an active

mode (SAT, CD, AUX, etc.) to change

mode specific settings.

Equalizer, Balance And Fade

Audio Control Menu

• Press the AUDIO hard-key on the right

side of the radio.

• Use either the “arrow” soft-keys or the

cross-hair on the screen to change Bal-

ance and Fade. The “CENTER” soft-

key resets the settings.

• Touch the “Equalizer” soft-key and

use either the arrow soft-keys or the

sliders on the screen to adjust BASS, MID, and/or TREBLE.

Display Settings

• Press the MENU hard-key and touch

the “Display Settings” soft-key to ac-

cess the Display Settings menu.

• Select the “Daytime Colors” soft-key

to switch to manual daytime mode and

to adjust the brightness of the display

using daytime colors.

• Select the “Nighttime Colors” soft-key

to switch to manual nighttime mode and to adjust the brightness of the display

using nighttime colors.

• Select the “Auto Color Mode” soft-key to switch to automatic daytime/nighttime

mode and to control the brightness of the display using the dimmer switch of the

vehicle.

• Touch the “EXIT” soft-key to save your settings.

ELECTRONICS

Radio Operation

• To access Radio Mode, touch the RADIO hard-key on the left side of the faceplate,

then touch the “AM,” “FM” or “SAT” soft-key at the top of the screen to select the

band.

Seek Up/Seek Down

• Press the “Seek Up” or “Seek Down” soft-keys to seek through radio stations in

AM, FM, or SAT bands. Hold either Seek to bypass stations without stopping.

Store Radio Presets

• Select the radio band by touching either the “AM,” “FM,” or “SAT” soft-key.

• Find the station to store by either pressing the “Seek Up” or “Seek Down”

soft-keys, touching the “SCAN” soft-key, or by using the “DIRECT TUNE” soft-key.

• Once the station is found, touch and hold one of the “PRESET” soft-keys in the

list to the right, until you hear a confirmation beep.

NOTE:

If the Presets are not visible on the right side of the screen, press the “PRESETS”

soft-key.

ELECTRONICS

CD/DVD Disc Operation

• Press the MEDIA hard-key to display the media source tabs at the top of the

screen. Select the source by touching the “HDD,” “DISC,” or “AUX” media source

soft-key tab.

NOTE:

Your Touchscreen Radio will usually automatically switch to the appropriate mode

when something is first connected or inserted into the system.

Insert a CD/DVD Disc

• To insert a disc, press the LOAD hard-key.

• With the printed side upwards, insert the disc into the disc slot of the radio. The

radio pulls the disc in automatically and closes the flip screen. The radio selects

the appropriate mode after the disc is recognized, and starts playing the first track.

The display shows “Reading...” during this process.

Seek Up/Seek Down

• Press the “Seek Up” or “Seek Down” soft-keys to seek through tracks in Disc

Mode. Hold either Seek to bypass tracks without stopping.

ELECTRONICS

Audio Jack Operation

• The AUX/Audio Jack provides a means to connect a portable audio device, such as

an MP3 player or an iPod

, to the vehicle’s sound system. This requires the use of

a 3.5 mm stereo audio patch cable.

• Press the MEDIA hard-key then the “AUX” soft-key to change the mode to

auxiliary device if the Audio Jack is connected, allowing the music from your

portable device to play through the vehicle's speakers.

• The functions of the portable device are controlled using the device itself, not the

buttons on the radio. However, the volume may be controlled using the radio or

portable device.

Hard Disk Drive (HDD) Operation

• The Hard Disk Drive (HDD) mode gives you access to the audio files on the internal

hard disk drive. It functions similar to a CD player, with the exception that the

internal HDD can hold more tracks.

• It is also possible to import display pictures to the internal hard disk drive. The

pictures can be displayed on the right half of the radio screen.

• Before using the HDD mode, you will need to copy songs and pictures to the

internal hard drive. Songs and pictures can be added to the hard drive by using a

CD or USB device (e.g. thumb drive or memory stick).

NOTE:

• HDD supports only .jpg/JPEG formats for photos.

• WMA/MP3 Files and Selective Songs from a CD can also be added to the HDD. See

the Uconnect

430/430N User's Manual for more information.

Copying Music From CD

• Press the LOAD hard-key.

• Insert a disc, then press the MY FILES hard-key and then select “MY MUSIC”

soft-key.

• Touch the “Add Music Files to HDD” soft-key, then touch the “Disc” soft-key in

the next screen to start the process.

NOTE:

• You might need to select the folder or

title depending on the CD, then press

“DONE” to start the copy process.

• The copy progress is shown in the

lower left corner of the screen.

ELECTRONICS

Copying Music From USB

• The USB port on the radio face plate allows you to copy files to your hard drive.

To access, lift up on the cover.

• Insert a USB device (e.g. thumb drive or memory stick), then select “MY MUSIC”

soft-key.

• Touch the “Add Music Files to HDD” soft-key, then touch the “Front USB”

soft-key in the next screen.

• Select the folders or titles you would

like to copy, then touch the “DONE”

soft-key to start the copy process.

NOTE:

The copy progress is shown in the lower

left corner of the screen.

Copying Pictures To The HDD

• Insert either a CD or a USB device containing your pictures in JPEG format.

• Press the MY FILES hard-key.

• Touch the “My Pictures” soft-key to get an overview of the currently stored images,

then touch the “Add” soft-key.

• Touch the “Disc” or “USB” soft-key, then select the folders or pictures you wish

to copy to the HDD. Use the “PAGE” soft-keys to page through the list of pictures.

• Touch the desired pictures or press the “All” soft-key for all pictures. Confirm your

selections by touching the “SAVE” soft-key.

NOTE:

The copy progress is shown in the lower

left corner of the screen.

ELECTRONICS

Display A Picture On The Radio Screen

• Once the import is complete, the pictures will then be available in the

“MY PICTURES” screen.

• Press the MY FILES hard-key, then touch the “My Pictures” soft-key. Touch the

desired picture, then touch the “Set as Picture View” soft-key and then touch the

“Exit” soft-key. Lastly press the MENU hard-key and then touch the “Picture View”

soft-key to display the chosen picture on the radio screen.

NOTE:

• A check mark in the My Pictures screen indicates the currently used picture.

• You can also delete pictures by touching the “Delete” soft-key.

Playing Music From The HDD

• Press the MEDIA hard-key to display the media source tabs at the top of the

screen. Touch the “HDD” soft-key tab. Touch the desired track soft-key to play or

touch the “SEARCH/BROWSE” soft-key to search by artist, by album, by song, by

genre, from a folder, or from Favorites.

Cleaning Your Touchscreen Radio

• Do not spray any liquid or caustic chemicals directly on the screen. Use a clean

and dry micro fiber lens cleaning cloth to clean the touchscreen.

• If necessary, use a lint-free cloth dampened with a cleaning solution such as

isopropyl alcohol or an isopropyl alcohol and water solution ratio of 50:50. Always

follow the solvent manufacturer's precautions and directions.

ELECTRONICS

Garmin® Navigation

• Uconnect

430N integrates Garmin’s consumer-friendly navigation into your

vehicle. Garmin

Navigation includes a database with over six million points of

interest.

• Touch the “NAV” soft-key in the upper right corner of the screen to access the

Navigation system.

Changing the Navigation Voice Prompt

Volume

1. Program a destination.

2. While traveling on your route, touch

the upper left area of the map screen

where your next turn is displayed.

3. The Navigation system will then re-

peat the distance to your next turn.

4. While the Navigation system is speaking, use the ON/OFF VOLUME rotary knob to

adjust the volume to a comfortable level. Please note the volume setting for

Navigation Voice Prompt is different than the audio system.

NOTE:

For your own safety and the safety of others, it is not possible to use certain features

while the vehicle is in motion.

Main Navigation Menu

Finding Points Of Interest

• From the main Navigation menu, touch the “Where To?” soft-key, then touch the

“Points of Interest” soft-key.

• Select a Category, then a subcategory,

if necessary.

• Select your destination and touch the

“Go” soft-key.

ELECTRONICS

Finding A Place By Spelling The Name

• From the Main Navigation Menu touch the “Where To?” soft-key. Next, touch the

“Points of Interest” soft-key then touch the “Spell Name” soft-key.

• Enter the name of your destination.

• Touch the “Done” soft-key.

• Select your destination and touch the “Go” soft-key.

Entering A Destination Address

• From the main Navigation menu touch the “Where To?” soft-key, then touch the

“Address” soft-key.

• Follow the on-screen prompts to enter the address then touch the “Go” soft-key.

Setting Your Home Location

• From the main Navigation menu touch the "Tools" icon. Next select the "My Data"

folder icon. Then select "Set Home Location."

• You may enter your address directly, use your current location as your home

address, or choose from recently found locations.

Edit Home Location

• From the main Navigation menu touch the “Where To?” soft-key, then touch the

"Tools" icon. Next, touch the "My Data" folder.

• You may enter a new address directly, use your current location or choose from

recently found locations.

Go Home

• A Home location must be saved in the system. From the Main Navigation menu,

touch the “Where To?” soft-key, then touch the “Go Home” soft-key.

ELECTRONICS

Following Your Route

• Your route is marked with a magenta line on the map. If you depart from the

original route, your route is recalculated. A speed limit icon could appear as you

travel on major roadways.

Adding A Via Point

• To add a stop between the current location and the end destination (Via Point) you

must be navigating a route.

• Touch the “back arrow” icon multiple times to return to the Main Navigation

menu.

• Touch the “Where To?” soft-key, then search for the additional stop. Select the

destination you wish to add from the given search results.

• Touch the “Go” soft-key, then touch "Add as a Via Point" soft-key and press the

"Done" soft-key.

ELECTRONICS

Taking A Detour

• To take a detour you must be navigating a route.

• Touch the “back arrow” icon soft-key multiple times to return to the Main

Navigation menu.

• Touch the “Detour” soft-key.

NOTE:

If the route you are currently taking is the only reasonable option, the device might

not calculate a detour.

Acquiring Satellites

• The GPS Satellite strength bars indicate the strength of your satellite reception.

• Acquiring satellite signals can take a few minutes. When at least one of the bars

is green, your device has acquired satellite signals.

• You may experience delays receiving satellite signals when in areas with an

obstructed view to the sky, such as garages, tunnels, or large cities with tall

buildings.

SiriusXM SATELLITE RADIO/TRAVEL LINK

• SiriusXM Travel Link requires a subscription, sold separately after the 1 year trial

subscription included with your vehicle purchase.

• SiriusXM Travel Link is only available in the United States.

• The following describes features that are available when in SiriusXM Satellite

Radio mode.

• To access SiriusXM Satellite Radio, press the RADIO/MEDIA or RADIO hard-key,

then touch the “SAT” soft-key tab.

Info

• Touch the “i” soft-key to view detailed information about the current SiriusXM

Satellite channel.

SiriusXM Parental Controls

• SiriusXM offers the option to permanently block selected channels. Call

1-888-539-7474 and request the Family Package.

• Uconnect® 430/430N and 730N: Press the MENU hard-key while in SiriusXM

Satellite Radio Mode, then touch the “Channel Lock” to enable and/or disable

desired channels. The SEEK and SCAN function will then only display channels

without Channel lock.

ELECTRONICS

Search/Browse

• Touch the “magnifying glass” soft-key to search/browse the SiriusXM channel

listing by Favorites and Categories such as Song, Artist and Channel Name. The

Search/Browse also allows you manage your Favorites.

SiriusXM Satellite Radio Favorites

(SAT Favorites)

• You can save 50 favorite songs and 50

favorite artists.

• Touch the “add favorite” soft-key to

add either the song or the artist of the

currently playing program to the SAT

Favorites list. The favorite star will ap-

pear in the upper right corner, below

the SAT soft-key.

•

You will see a favorite star indicator in

the upper right side of the screen below

the SAT soft-key and a pop up will alert

you that a favorite song or artist is cur-

rently playing on one of the SiriusXM

satellite radio channels.

NOTE:

Refer to your Uconnect

730N or

430/430N User's Manual for more infor-

mation.

ELECTRONICS

Display SAT Favorites List

• Touch the “Search/Browse” soft-key and select “Favorites” from the SAT Browse

screen.

• Touch the desired favorites soft-key to

switch the SAT tuner to the corre-

sponding channel.

• You may use the “LIST” soft-key to

toggle between:

• Favorite Songs

• Favorite Artists

• Currently playing favorites

Replay

• While you are in SAT mode, you can

replay 44 minutes of the current Siri-

usXM channel (when the channel is

changed, this audio buffer is erased).

Press the REPLAY button to listen to

the stored audio.

• You can touch the on-screen controls

to pause and rewind audio playback,

touch the SCAN button to preview

each of the tracks stored in the buffer,

or select a track from the list.

• The time displayed below the bar indi-

cates how much time is present be-

tween the current buffer play position

and the live broadcast.

Replay Option Option Description

Play/Pause Touch to pause content playback. Touch “Pause/Play” again to

resume playback.

Rewind/RW Rewinds the channel content in steps of five seconds. Touch and hold

to rewind continuously, then release to begin playing content at that

point.

Fast Forward/FW Forwards the content, and works similarly to Rewind/RW. However,

Fast Forward/FW can only be used when content has been previously

rewound.

Replay Time Displays the amount of time in the upper center of the screen by

which your content lags the live channel.

Live Resumes playback of live content at any time while replaying

rewound content.

ELECTRONICS

SiriusXM Travel Link (Uconnect® 730N & Uconnect® 430N Only)

NOTE:

• SiriusXM Travel Link requires a subscription, sold separately after the 1 year trial

subscription included with your vehicle purchase.

• SiriusXM Travel Link is only available in the United States.

• SiriusXM Travel Link brings a wealth of useful information into your vehicle, right

to your fingertips.

• To access Travel Link, press the MENU hard-key, then the “Travel Link” soft-key.

1 – Favorites

View and store your favorite location, theater and sport

teams for quick access.

2 – Forecast

View detailed weather conditions, forecasts and

ski/snowboarding conditions at resorts.

3 – Ski Info

View ski and snowboarding conditions at ski resorts.

4 – Fuel Prices

View detailed price information for fuel stations.

5 – Movies

View information on movies that are playing at theaters.

6 – Sports

View sports scores and upcoming events for all major

sports.

ELECTRONICS

STEERING WHEEL AUDIO CONTROLS

• The steering wheel audio controls are

located on the rear surface of the steer-

ing wheel.

Right Switch

•

Press the switch up or down to increase

or decrease the volume.

• Press the button in the center to

change modes AM/FM/CD/SAT.

Left Switch

• Press the switch up or down to search

for the next listenable station or select

the next or previous CD track.

• Press the button in the center to select

the next preset station (radio) or to change CDs if equipped with a CD Changer.

iPod®/USB/MP3 CONTROL

• There are many ways to play music from iPod

/MP3 players or USB devices

through your vehicle's sound system.

• The remote USB port, located within the front storage area, allows you to connect

an iPod

into the vehicle's sound system.

• Non-Touchscreen Radios: To hear audio from devices connected to the USB port,

press the “AUX” button on the radio faceplate.

• Touchscreen Radios: To hear audio from devices connected to the USB port, press

the MEDIA hard-key, then touch the “AUX” or “iPod

” soft-key.

• When connected to this feature:

• The iPod

can be controlled using

the radio buttons to Play, Browse,

and List the iPod

or external de-

vices contents.

• The iPod

battery charges when

plugged into the USB port (if sup-

ported by the specific audio device).

• Compatible iPod

devices may also be controllable using voice commands.

Refer to the Owner's Manual on the DVD for details.

ELECTRONICS

NOTE:

The USB port supports certain Mini, Classic, Nano, Touch, and iPhone

devices. The

USB port also supports playing music from compatible external USB Mass Storage

Class memory devices. For supported audio file formats, refer to the USB Port section

in the Owner's Manual on the DVD. Refer to www.UconnectPhone.com website for a

list of tested iPod

s. Some iPod

software versions may not fully support the USB

port features. Please visit Apple’s website for iPod

software updates.

WARNING!

Do not plug in or remove the iPod

or external device while driving. Failure to

follow this warning could result in a collision.

Uconnect® Phone

• To determine if your vehicle is equipped with Uconnect

Phone, press the

Uconnect

Phone button l ocated on the radio faceplate. If your vehicle has

this feature, you will hear a voice prompt. If not, you will see a message on the

radio stating “Uconnect phone not available.”

• The Uconnect

Phone is a voice-activated, hands-free, in-vehicle communica-

tions system with Voice Command Capability (see Voice Command section).

NOTE:

To access the tutorial, press the Uconnect

Phone button and after the BEEP,

say “tutorial.” Press any hard-key/button or touch the display (Touchscreen radio) to

cancel the “tutorial.”

• The Uconnect

Phone allows you to dial a phone number with your mobile phone

using simple voice commands.

• Refer to your vehicle Owner's Manual on the DVD for further details.

NOTE:

The Uconnect

Phone requires a mobile phone equipped with the Bluetooth

Hands-Free Profile Version 1.0 or higher. For Uconnect

Customer Support: U.S.

residents - visit www.UconnectPhone.com or call 1–877–855–8400. Canadian

Residents - call, 1-800-465–2001 (English) or 1-800-387-9983 (French). This site

will provide specific instructions based on the type of mobile phone being paired.

ELECTRONICS

Phone Pairing

NOTE:

Pairing is a one-time initial setup before using the phone. Prior to starting the pairing

procedure ensure all additional phones within the vehicle have their Bluetooth

disabled.

• Press the “Phone”

button to begin.

• Wait for the “ready” prompt and BEEP.

• After the BEEP, say ”setup” or “Uconnect device setup.”

• After the BEEP, say “device pairing.”

• After the BEEP, say “pair a device.”

• Follow the audible prompts.

• You will be asked to say a four-digit

Personal Identification Number (PIN),

which you will later need to enter into

your mobile phone. You can say any

four-digit PIN. You will not need to

remember this PIN after the initial

pairing process.

• You will then be prompted to give the phone pairing a name (each phone paired

should have a unique name).

• Next you will be asked to give this new pairing a priority of 1 through 7 (up to seven

phones may be paired); 1 is the highest and 7 is the lowest priority. The system will

only connect to the highest priority phone that exists within the proximity of the

vehicle.

• You will then need to start the pairing procedure on your cell phone. Follow the

Bluetooth

instructions in your cell phone Owner's Manual to complete the phone

pairing setup.

ELECTRONICS

Phonebook

Phonebook Download – Automatic Phonebook Transfer From Mobile Phone

• If equipped and specifically supported by your phone, Uconnect

Phone auto-

matically downloads names (text names) and number entries from your mobile

phone’s phonebook. Specific Bluetooth

Phones with Phone Book Access Profile

may support this feature. Automatic Transfer is indicated by a green arrow at the

bottom of the screen. See www.UconnectPhone.com for supported phones.

• Automatic download and update, if supported, begins as soon as the Bluetooth

wireless phone connection is made to the Uconnect

Phone. For example, after

you start the vehicle.

NOTE:

The mobile phone may require authorization prior to download.

• A maximum of 1000 entries per phone will be downloaded and updated every time

a phone is connected to the Uconnect

Phone.

• Depending on the maximum number of entries downloaded, there may be a short

delay before the latest downloaded names can be used. Until then, if available, the

previously downloaded phonebook is available for use.

• Only the phonebook of the currently connected mobile phone is accessible.

• Only the mobile phone’s phonebook is downloaded. The SIM card phonebook is

not part of the Mobile phonebook.

• This downloaded phonebook cannot be edited or deleted on the Uconnect

Phone. These can only be edited on the mobile phone. The changes are transferred

and updated to Uconnect

Phone on the next phone connection.

Making A Phone Call

• Press the “Phone” button .

• After the BEEP, say “dial” (or “call” a name).

• After the BEEP, say number (or name).

Receiving A Call — Accept (And End)

• When an incoming call rings/is announced on Uconnect

, press the “Phone”

button

• To end a call, press the “Phone” button

Mute (Or Unmute) Microphone During Call

• During a call, press the “Voice Command” button .

• After the BEEP, say “mute” (or “mute off”).

Transfer Ongoing Call Between Handset And Vehicle

• During a call, press the “Voice Command” button .

• After the BEEP, say “transfer call.”

ELECTRONICS

Changing The Volume

• Start a dialogue by pressing the “Phone” button , then adjust the volume

during a normal call.

• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable

level while the Uconnect

system is speaking. Please note the volume setting for

Uconnect

is different than the audio system.

WARNING!

• Any voice commanded system should be used only in safe driving conditions

following applicable laws regarding phone use. Your attention should be

focused on safely operating the vehicle. Failure to do so may result in a

collision causing you and others to be severely injured or killed.

• In an emergency, to use Uconnect

Phone, your mobile phone must be:

• turned on,

• paired to Uconnect

Phone,

• and have network coverage.

Uconnect® VOICE COMMAND

Voice Command Operation

• The Uconnect

Voice Command system allows you to control your AM, FM radio,

satellite radio, disc player, HDD, Uconnect

Phone, a memo recorder, and

supported portable media devices.

• When you press the “Voice Command” button

located on the radio

faceplate or steering wheel, you will hear a beep. The beep is your signal to give a

command. If you do not say a command within a few seconds, the system will

present you with a list of options. If you ever want to interrupt the system while it

lists options, press the “Voice Command” button

, listen for the BEEP, and

say your command.

NOTE:

Visit http://www.driveuconnect.com/features/voiceCommand/ for more info on which

voice command features apply to your vehicle.

• Start a dialogue by pressing the “Voice Command” button

, you will hear

a beep. The beep is your signal to give a command. Below are a list of voice

commands for each of the different modes.

ELECTRONICS

Common Voice Commands (Examples)

While In: Voice Command Example:

Main Menu

“Radio AM” (to switch to the AM radio mode)

“Radio FM” (to switch to the FM radio mode)

“Satellite Radio” (to switch to the Satellite radio mode)

“Disc” (to switch to the disc mode)

“USB” (to switch to the USB mode)

“Bluetooth Streaming” (to switch to the Bluetooth Streaming mode)

“Memo” (to switch to the memo recorder)

“System Setup” (to switch to system setup)

Radio Mode

“Frequency” (to change the frequency)

“Next Station” (to select the next station)

“Previous Station” (to select the previous station)

“Radio Menu” (to switch to the radio menu)

“Main Menu” (to switch to the main menu)

SiriusXM Satellite

Radio Mode

“Channel Number” (to change the channel by its spoken number)

“Next Channel” (to select the next channel)

“Previous Channel” (to select the previous channel)

“List Channel” (to hear a list of available channels)

"Channel Name" (to change the channel by its spoken name)

“Select Name” (to say the name of a channel)

“Radio Menu” (to switch to the radio menu)

“Main Menu” (to switch to the main menu)

Disc Mode

“Track” (#) (to change the track)

“Next Track” (to play the next track)

“Previous Track” (to play the previous track)

“Main Menu” (to switch to the main menu)

Memo Mode

To switch to the voice recorder mode, say “Memo.” The follow-

ing are common voice commands for this mode: “New Memo”

(to record a new memo) — During the recording, you may

press the Voice Command button

to stop recording.

You proceed by saying one of the following commands:

— “Save” (to save the memo)

— “Continue” (to continue recording)

— “Delete” (to delete the recording)

— “Play Memos” (to play previously recorded memos) — During

the playback you may press the Voice Command button

to stop playing memos. You proceed by saying one of the

following commands:

— “Repeat” (to repeat a memo)

— “Next” (to play the next memo)

— “Previous” (to play the previous memo)

— “Delete” (to delete a memo)

— “Delete All” (to delete all memos)

ELECTRONICS

Voice Text Reply

• If equipped with Uconnect

Voice Command, your Uconnect

430N / 730N radio

may be able to play incoming Short Message Service (SMS) messages (text

messages) through the vehicle's sound system.

• It also allows you to respond by selecting from various predefined phrases.

• Not all phones are compatible with this feature. Refer to the phone compatibility

list at www.UconnectPhone.com. Connected mobile phones must be bluetooth-

compatible and paired with your radio.

• Press the “Voice Command” button

and after the BEEP, say “SMS” to get

started.

NOTE:

To access the tutorial, press the “Voice Command” button

. After the BEEP,

say “tutorial.” Press any hard-key/button or touch the display (Touchscreen radio) to

cancel the tutorial.

WARNING!

Any voice commanded system should be used only in safe driving conditions

following applicable laws regarding phone use. Your attention should be focused

on safely operating the vehicle. Failure to do so may result in a collision causing

you and others to be severely injured or killed.

Bluetooth® STREAMING AUDIO

• If equipped with Uconnect

Voice

Command, your Bluetooth

-equipped

iPod

devices, cell phones or other

media players, may also be able to

stream music to your vehicle's speak-

ers. Your connected device must be

Bluetooth

-compatible, and paired

with your radio (see Uconnect

Phone

for pairing instructions).

• Non-Touchscreen Radios: Press the “AUX” button on the radio faceplate until “BT”

or “Audio Streaming” is displayed on the radio screen.

• Touchscreen-Radios: Press the RADIO/MEDIA or MEDIA hard-key and then touch

the “AUX” soft-key tab.

ELECTRONICS

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)

• The EVIC features a driver interactive

display that is located in the instru-

ment cluster. Pressing the controls on

the steering wheel allows the driver to

select vehicle information and Per-

sonal Settings. For additional informa-

tion, refer to Programmable Features

in this guide.

• Press and release the MENU button

and the mode displayed will change

between Compass/Temperature, Trip,

System Status, and Personal settings.

• Press the DOWN Arrow

button to scroll through sub menus (e.g., Trip

Functions, Avg. Fuel Economy, DTE, Elapsed Time, and Units).

• Press and release the COMPASS

button for instant access to the Compass/

Temperature screens.

• Press the RIGHT Arrow

button to RESET Trip Functions and change Personal

Settings.

Compass Calibration

• This compass is self-calibrating, which eliminates the need to set the compass

manually. When the vehicle is new, the compass may appear erratic and the EVIC

will display “CAL” until the compass is calibrated.

• You may also calibrate the compass by completing one or more 360 degree turns

(in an area free from large metal or metallic objects) until the “CAL” message

displayed in the EVIC turns off. The compass will now function normally.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC)

• The EVIC can be used to program the following Personal Settings. Press and

release the MENU button until Personal Settings displays, then press the DOWN

Arrow button

to scroll through the settings. Press the RIGHT Arrow button

to change the setting.

• Language • Illuminated Approach

• Auto Unlock On Exit • Hill Start Assist (HSA)

• RKE Unlock Driver's Door 1st • Display Units In

• Flash Lamps With Lock • Confirmation of Voice Commands

• Sound Horn With Lock • Automatic Compass Calibration

• Headlamp Off Delay • Compass Variance

• Key Off Power Delay

ELECTRONICS

Key Fob Programmable Features

• The following features may also be programmed by using the Key Fob transmitter

or the ignition switch and driver's door lock switch.

NOTE:

Pressing the LOCK button while you are inside the vehicle will activate the Vehicle

Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause

the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security

Alarm.

Unlock On First Press

• To unlock either the driver's side, or all doors, on the first press of the UNLOCK

button:

• Press and hold the LOCK button for at least four seconds, but no longer than

10 seconds. Then, press and hold the UNLOCK button while still holding the

LOCK button.

• Release both buttons at the same time.

Auto Unlock Doors On Exit

• To have all of the vehicle doors unlock when any door is opened:

• Enter your vehicle and close all the doors, and fasten your seat belt.

• Cycle the ignition switch between the LOCK and ON position four times, ending

in the LOCK position (do not start the engine).

• Press the power door UNLOCK switch to unlock the doors. A single chime will

indicate that programming is complete.

Auto Door Lock

• To have the doors lock automatically when the vehicle’s speed exceeds 15 mph

(24 km/h):

• Enter your vehicle and close all the doors.

• Cycle the ignition switch between LOCK and ON and then back to LOCK four

times, ending up in the LOCK position (do not start the engine).

• Press the power door LOCK switch to lock the doors. A single chime will indicate

that programming is complete.

Sound Horn With Lock

• To turn the horn chirp on or off when the doors are locked:

• Press the LOCK button for at least four seconds, but no longer than 10 seconds.

Then, press the PANIC button while still holding the LOCK button.

• Release both buttons at the same time.

ELECTRONICS

Flashing Lights With Lock

• The turn signal lights flashing, when the doors are locked or unlocked, feature can

be turned on or off. To turn this feature on or off:

• Press and hold the UNLOCK button for at least four seconds, but no longer than

10 seconds. Then, press and hold the LOCK button while still holding the

UNLOCK button.

• Release both buttons at the same time.

UNIVERSAL GARAGE DOOR OPENER (HomeLink®)

• HomeLink

replaces up to three hand-held transmitters that operate devices such

as garage door openers, motorized gates, lighting or home security systems. The

HomeLink

unit is powered by your vehicles 12 Volt battery.

• The HomeLink

buttons that are located in the overhead console or sunvisor

designate the three different HomeLink

channels.

• The HomeLink

indicator is located above the center button.

Before You Begin Programming

HomeLink®

• Ensure that your vehicle is parked out-

side of the garage before you begin

programming.

• For efficient programming and accu-

rate transmission of the radio-

frequency signal, it is recommended

that a new battery be placed in the

hand-held transmitter of the device

that is being programmed to the

HomeLink

system.

• Erase all channels before you begin programming. To erase the channels, place

the ignition switch into the ON/RUN position, then press and hold the two outside

HomeLink

buttons (I and III) for up to 20 seconds or until the red indicator

flashes.

NOTE:

Erasing all channels should only be performed when programming HomeLink

for

the first time. Do not erase channels when programming additional buttons.

• If you have any problems, or require assistance, please call toll-free

1-800-355-3515 or, on the Internet at www.HomeLink.com for information or

assistance.

ELECTRONICS

Programming A Rolling Code

• For programming Garage Door Openers that were manufactured after 1995. These

Garage Door Openers can be identified by the “LEARN” or “TRAIN” button located

where the hanging antenna is attached to the Garage Door Opener. It is NOT the

button that is normally used to open and close the door. The name and color of the

button may vary by manufacturer.

1. Place the ignition switch into the ON/RUN position.

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink

button you wish to program while keeping the HomeLink

indicator light in view.

3. Simultaneously press and hold both the HomeLink

button you want to program

and the hand-held transmitter button.

4. Continue to hold both buttons and observe the indicator light. The HomeLink

indicator will flash slowly and then rapidly after HomeLink

has received the

frequency signal from the hand-held transmitter. Release both buttons after the

indicator light changes from slow to rapid.

5. At the garage door opener motor (in the garage), locate the “LEARN” or

“TRAINING” button. This can usually be found where the hanging antenna wire

is attached to the garage door opener motor. Firmly press and release the

“LEARN” or “TRAINING” button.

NOTE:

You have 30 seconds in which to initiate the next step after the LEARN button has

been pressed.

6. Return to the vehicle and press the programmed HomeLink

button twice

(holding the button for two seconds each time). If the device is plugged in and

activates, programming is complete.

NOTE:

If the device does not activate, press the button a third time (for two seconds) to

complete the training.

7. To program the remaining two HomeLink

buttons, repeat each step for each

remaining button. DO NOT erase the channels.

ELECTRONICS

Programming A Non-Rolling Code

• For programming Garage Door Openers manufactured before 1995.

1. Turn the ignition switch to the ON/RUN position.

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink

button you wish to program while keeping the HomeLink

indicator light in view.

3. Simultaneously press and hold both the HomeLink

button you want to program

and the hand-held transmitter button.

4. Continue to hold both buttons and observe the indicator light. The HomeLink

indicator will flash slowly and then rapidly after HomeLink

has received the

frequency signal from the hand-held transmitter. Release both buttons after the

indicator light changes from slow to rapid.

5. Press and hold the programmed HomeLink

button and observe the indicator

light.

NOTE:

• If the indicator light stays on constantly, programming is complete and the garage

door (or device) should activate when the HomeLink

button is pressed.

• To program the two remaining HomeLink

buttons, repeat each step for each

remaining button. DO NOT erase the channels.

Using HomeLink®

• To operate, press and release the programmed HomeLink

button. Activation will

now occur for the programmed device (e.g., garage door opener, gate operator,

security system, entry door lock, home/office lighting, etc.,). The hand-held

transmitter of the device may also be used at any time.

WARNING!

• Your motorized door or gate will open and close while you are programming the

universal transceiver. Do not program the transceiver if people or pets are in the

path of the door or gate.

• Do not run your vehicle in a closed garage or confined area while programming

the transceiver. Exhaust gas from your vehicle contains Carbon Monoxide (CO)

which is odorless and colorless. Carbon Monoxide is poisonous when inhaled

and can cause you and others to be severely injured or killed.

ELECTRONICS

POWER INVERTER

• A 115 Volt, 150 Watt AC power in-

verter is located on the front of the

center console.

• This outlet can power cellular phones,

electronics and other low power de-

vices requiring power up to 150 Watts.

NOTE:

The power inverter is designed with

built-in overload protection. If the power

rating of 150 Watts is exceeded, the

power inverter will automatically shut

down. Once the electrical device has been removed from the outlet, the inverter

should automatically reset. If the power rating exceeds approximately 170 Watts, the

power inverter may have to be reset manually. To reset the inverter manually, unplug

the device and plug it in again. To avoid overloading the circuit, check the power

ratings on electrical devices prior to using the inverter.

WARNING!

• To Avoid Serious Injury or Death DO NOT:

• use a three-prong adaptor

• insert any objects into the receptacles

• touch with wet hands

Close the lid when not in use. If this outlet is mishandled, it may cause an electric

shock and failure.

ELECTRONICS

POWER OUTLET

• The power outlet is located on the instrument panel below the climate control and

is powered when the ignition switch is in the ON/RUN position.

• The outlet can operate a conventional cigar lighter unit or power accessories

designed for use with a standard power outlet adapter.

NOTE:

• Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the

160 Watt (13 Amp) power rating is exceeded, the fuse protecting the system will

need to be replaced.

• Power outlets are designed for accessory plugs only. Do not insert any other object

in the power outlet as this will damage the outlet and blow the fuse. Improper use

of the power outlet can cause damage not covered by your new vehicle warranty.

1 — Cigar Lighter 2— Power Outlet

ELECTRONICS

FOUR-WHEEL DRIVE OPERATION

• This vehicle has two full time, on-demand, four-wheel-drive (4WD) systems

available, Freedom Drive I™ and Freedom-Drive II™. They provide for all-weather,

all-terrain capability for added driving security in less-than-ideal road conditions.

Freedom-Drive I™ Four Wheel Drive System

• The vehicle will constantly monitor wheel slippage and transfer power to the axle

that can use it the most.

• For additional traction in sand, deep snow or loose traction surfaces, the “4WD

Lock” sends equal amounts of the torque to the front and rear axles at low speeds.

• To activate, pull the T-handle, located in between the front driver and passenger

seats, up once and release. The “4WD Indicator Light” will come on in the cluster.

• This can be done on the fly, at any vehicle speed. To deactivate, simply pull on the

T-handle one more time. The “4WD Indicator Light” will then turn off.

OFF-ROAD CAPABILITIES

Trail Rated® Freedom-Drive II™ Four Wheel

Drive System (IF EQUIPPED)

•

This system offers

all the benefits of

Freedom Drive I™

plus the rugged ca-

pability of true Trail-

Rated off road per-

formance with three

additional features:

Off-Road Mode

• Pulling up on the T-handle while the

gear shift lever is in the Low position

activates the Off-Road mode.

• This feature allows power to be sent to

all four wheels when additional trac-

tion is required while also delivering

enhanced off-road capability for water

fording, moving on steep grades and rock crawling.

Brake Lock Differential

• This feature helps keep the vehicle moving forward when one wheel loses traction

by directing power from the wheel that slips to the wheel with more grip on the

same axle providing more traction in off-road situations.

Hill Descent Control/Hill Start Assist

• The Hill Descent Control System maintains vehicle speed while descending hills

during off-road driving situations and is available in both low and reverse gears.

• This allows a smooth and controlled hill descent on rough or slippery terrain

without the driver needing to touch the brake pedal.

• The Hill Start Assist system assists the driver when starting a vehicle from a stop

on a hill.

OFF-ROAD CAPABILITIES

TRAILER TOWING WEIGHTS (MAXIMUM TRAILER

WEIGHT RATINGS)

Engine/

Transmission

Frontal Area

Max. GTW

(Gross Trailer Wt.)

Max. Tongue Wt.

(See Note)

2.0L Auto/Man

22 sq ft

(2.04 sq m)

1,000 lbs (450 kg) 150 lbs (68 kg)

2.4L Auto/Man

22 sq ft

(2.04 sq m)

1,000 lbs (450 kg) 150 lbs (68 kg)

2.4L Auto/Man

with Trailer Tow

Prep Package

(AHC)

32 sq ft

(3.0 sq m)

2,000 lbs (907 kg) 300 lbs (136 kg)

2.4L Auto With

Freedom Drive

II Off Road

Package (AWL)

32 sq ft

(3.0 sq m)

2,000 lbs (907 kg) 300 lbs (136 kg)

Refer to local laws for maximum trailer towing speeds.

NOTE:

The trailer tongue weight must be considered as part of the combined weight of

occupants and cargo, and should never exceed the weight referenced on the Tire and

Loading Information placard.

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)

Towing

Condition

Wheels OFF the

Ground

Manual Transmission

Automatic

Transmission

Flat Tow None

• Transmission in

NEUTRAL

• Key in ACC Position

NOT ALLOWED

Dolly Tow

Front

OK (FWD Only) OK (FWD Only)

Rear

NOT ALLOWED NOT ALLOWED

On Trailer

All

OK OK

NOTE:

Vehicles equipped with

manual transmissions may be recreationally towed (flat towed)

at any legal highway speed, for any distance, if the manual transmission is in

NEUTRAL and the ignition key is in the ACC position.

CAUTION!

•

Do not flat tow any vehicle equipped with a automatic transmission. Damage to the

drivetrain will result. If these vehicles require towing, make sure all drive wheels are

off the ground.

•

Front or rear wheel lifts should not be used. Internal damage to the transmission or

transfer case will occur if a front or rear wheel lift is used when recreational towing.

UTILITY

ROADSIDE ASSISTANCE

• Dial toll-free 1-800-521-2779 for U.S. Residents or 1-800-363-4869 for Cana-

dian Residents.

• Provide your name, vehicle identification number, license plate number, and your

location, including the telephone number from which you are calling.

• Briefly describe the nature of the problem and answer a few simple questions.

• You will be given the name of the service provider and an estimated time of arrival.

If you feel you are in an “unsafe situation”, please let us know. With your consent,

we will contact local police or safety authorities.

INSTRUMENT CLUSTER WARNING LIGHTS

- Electronic Stability Control (ESC) Activation/Malfunction Indicator Light

• If the “ESC Activation/Malfunction Indicator Light” comes on continuously with

the engine running, a malfunction has been detected in the ESC system. If this

light remains on after several ignition cycles, and the vehicle has been driven

several miles (kilometers) at speeds greater than 30 mph (48 km/h), we recom-

mend you do not operate the vehicle. Have the vehicle serviced immediately.

• The “ESC Activation/Malfunction Indicator Light” starts to flash as soon as the

tires lose traction and the ESC system becomes active. If the light begins to flash

during acceleration, ease up on the accelerator and apply as little throttle as

possible. Be sure to adapt your speed and driving to the prevailing road conditions.

The light also flashes when TCS is active. To improve the vehicle's traction when

starting off in deep snow, sand or gravel, it may be desirable to switch the ESC

system to Partial Off mode by momentarily pressing the ESC Off

switch.

- Electronic Stability Control (ESC) OFF Indicator Light

• This light indicates the Electronic Stability Control (ESC) is off.

- Tire Pressure Monitoring System (TPMS) Light

•

Each tire, including the spare (if provided), should be checked monthly, when cold

and inflated to the inflation pressure recommended by the vehicle manufacturer on

the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a

different size than the size indicated on the vehicle placard or tire inflation pressure

label, you should determine the proper tire inflation pressure for those tires.)

• As an added safety feature, your vehicle has been equipped with a Tire Pressure

Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or

more of your tires is significantly under-inflated. Accordingly, when the low tire

pressure telltale illuminates, you should stop and check your tires as soon as

possible, and inflate them to the proper pressure. Driving on a significantly

under-inflated tire causes the tire to overheat and can lead to tire failure.

Under-inflation also reduces fuel efficiency and tire tread life, and may affect the

vehicle’s handling and stopping ability.

WHAT TO DO IN EMERGENCIES

• IF THE LIGHT STARTS FLASHING INDICATING A LOW TIRE PRESSURE, ADJUST THE AIR

PRESSURE IN THE LOW TIRE TO THE AIR PRESSURE SHOWN ON THE VEHICLE PLACARD

OR TIRE INFLATION PRESSURE LABEL LOCATED ON THE DRIVER'S DOOR.

NOTE:

AFTER INFLATION, THE VEHICLE MAY NEED TO BE DRIVEN FOR 20 MINUTES

BEFORE THE FLASHING LIGHT WILL TURN OFF.

• Please note that the TPMS is not a substitute for proper tire maintenance, and it

is the driver’s responsibility to maintain correct tire pressure, even if under-

inflation has not reached the level to trigger illumination of the TPMS low tire

pressure telltale.

• Your vehicle has also been equipped with a TPMS malfunction indicator to

indicate when the system is not operating properly. The TPMS malfunction

indicator is combined with the low tire pressure telltale. When the system detects

a malfunction, the telltale will flash for approximately one minute and then remain

continuously illuminated. This sequence will continue each time the vehicle is

restarted as long as the malfunction exists.

• When the malfunction indicator is illuminated, the system may not be able to

detect or signal low tire pressure as intended. TPMS malfunctions may occur for a

variety of reasons, including the installation of replacement or alternate tires or

wheels on the vehicle that prevent the TPMS from functioning properly. Always

check the TPMS malfunction telltale after replacing one or more tires or wheels on

your vehicle, to ensure that the replacement or alternate tires and wheels allow the

TPMS to continue to function properly.

NOTE:

Tire pressures change by approximately 1 psi (7 kPa) per 12° F (7° C) of air

temperature change. Keep this in mind when checking tire pressure inside a garage,

especially in the Winter. Example: If garage temperature is 68°F (20°C) and the

outside temperature is 32°F (0°C), then the cold tire inflation pressure should be

increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12°F (7°C) for this

outside temperature condition.

CAUTION!

The TPMS has been optimized for the original equipment tires and wheels. TPMS

pressures and warning have been established for the tire size equipped on your

vehicle. Undesirable system operation or sensor damage may result when using

replacement equipment that is not of the same size, type, and/or style. Aftermar-

ket wheels can cause sensor damage. Do not use tire sealant from a can, or

balance beads if your vehicle is equipped with a TPMS, as damage to the sensors

may result.

WHAT TO DO IN EMERGENCIES

- Engine Temperature Warning Light

• This light warns of an overheated engine condition.

• If the light turns on and a warning chime sounds while driving, safely pull over and

stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into

NEUTRAL and idle the vehicle. If the temperature reading does not return to

normal, turn the engine off immediately.

• We recommend that you do not operate the vehicle or engine damage will occur.

Have the vehicle serviced immediately.

WARNING!

A hot engine cooling system is dangerous. You or others could be badly burned by

steam or boiling coolant.

BRAKE

- Brake Warning Light

• The Brake Warning light illuminates when there is either a system malfunction or

the parking brake is applied. If the light is on and the parking brake is not applied,

it indicates a possible brake hydraulic malfunction, brake booster problem or an

Anti-Lock Brake System problem.

• Please have your vehicle serviced immediately.

WARNING!

Driving a vehicle with the red brake light on is dangerous. Part of the brake system

may have failed. It will take longer to stop the vehicle. You could have a collision.

Have the vehicle checked immediately.

- Malfunction Indicator Light (MIL)

• Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may

illuminate the MIL after engine start. The vehicle should be serviced if the light

stays on through several typical driving cycles. In most situations, the vehicle will

drive normally and not require towing.

• If the MIL flashes when the engine is running, serious conditions may exist that

could lead to immediate loss of power or severe catalytic converter damage. We

recommend you do not operate the vehicle. Have the vehicle serviced immediately.

- Charging System Light

• This light shows the status of the electrical charging system. If the charging

system light remains on, it means that the vehicle is experiencing a problem with

the charging system.

• We recommend you do not continue driving if the charging system light is on. Have

the vehicle serviced immediately.

WHAT TO DO IN EMERGENCIES

- Oil Pressure Warning Light

• This light indicates low engine oil pressure. If the light turns on while driving, stop

the vehicle and shut off the engine as soon as possible. A chime will sound when

this light turns on.

• We recommend you do not operate the vehicle or engine damage will occur. Have

the vehicle serviced immediately.

- Anti-Lock Brake (ABS) Light

• This light monitors the Anti-Lock Brake System (ABS).

• If the light is not on during starting, stays on, or turns on while driving, we

recommend you drive to the nearest authorized dealer and have the vehicle

serviced immediately.

- Electronic Throttle Control (ETC) Indicator Light

• This light informs you of a problem with the system.

• If a problem is detected, the light will come on while the engine is running. Cycle

the ignition when the vehicle has completely stopped and the shift lever is placed

in the PARK position; the light should turn off.

• If the light remains lit with the engine running, your vehicle will usually be

drivable; however, see an authorized dealer immediately. If the light is flashing

when the engine is running, immediate service is required and you may experience

reduced performance, an elevated/rough idle or engine stall and your vehicle may

require towing.

- Air Bag Warning Light

• If the light is not on during starting, stays on, or turns on while driving, have the

vehicle serviced by an authorized dealer immediately.

4WD!

- 4WD System Fault Indicator Light

• When lit solid: There is a 4WD system fault. The 4WD performance will be at a

reduced level. We recommend you do not operate the vehicle. Have the vehicle

serviced immediately.

• When blinking: The 4WD system is temporarily disabled due to overload

condition.

WHAT TO DO IN EMERGENCIES

- Transmission Temperature Warning Light

• This light indicates that there is excessive transmission fluid temperature that

might occur with severe usage such as trailer towing. If this light turns on, you will

experience reduced vehicle performance until the automatic transmission cools

down. If the overheating continues, stop the vehicle and run the engine at idle,

with the transmission in NEUTRAL, until the light turns off. Once the light turns

off, you may continue to drive normally.

CAUTION!

Continuous driving with the Transmission Temperature Warning Light illuminated

will eventually cause severe transmission damage or transmission failure.

WARNING!

If you continue operating the vehicle when the Transmission Temperature Warning

Light is illuminated you could cause the fluid to boil over, come in contact with hot

engine or exhaust components and cause a fire.

Fuel Cap/Loose Gas Cap Message

• If a “gas cap” message (shown as gASCAP) appears, tighten the gas cap until a

“clicking” sound is heard.

• Press the odometer reset button, located below the tachometer, to turn the

message off.

• If the message continues to appear for more than three days after tightening the

gas cap, see your authorized service center.

Oil Change Indicator

Message

• If an “oil change” message (shown as CHANgE OIL) appears and a single chime

sounds, it is time for your next required oil change.

Resetting The Light After Servicing

• Turn the ignition switch to the ON/RUN position (do not start engine).

• Fully depress the accelerator pedal three times within 10 seconds.

• Turn the ignition switch to the OFF/LOCK position.

WHAT TO DO IN EMERGENCIES

IF YOUR ENGINE OVERHEATS

• In any of the following situations, you can reduce the potential for overheating by

taking the appropriate action.

• On the highways — slow down.

• In city traffic — while stopped, shift the transmission to NEUTRAL, but do not

increase engine idle speed.

NOTE:

There are steps that you can take to slow down an impending overheat condition:

• If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the

engine cooling system and turning the A/C off can help remove this heat.

• You can also turn the temperature control to maximum heat, the mode control to

floor and the blower control to high. This allows the heater core to act as a

supplement to the radiator and aids in removing heat from the engine cooling

system.

CAUTION!

Driving with a hot cooling system could damage your vehicle. If the temperature

gauge reads HOT (H), pull over and stop the vehicle. Idle the vehicle with the air

conditioner turned off until the pointer drops back into the normal range. If the

pointer remains on HOT (H), and you hear continuous chimes, turn the engine off

immediately, and call for service.

WARNING!

You or others can be badly burned by hot engine coolant (antifreeze) or steam from

your radiator. If you see or hear steam coming from under the hood, do not open

the hood until the radiator has had time to cool. Never try to open a cooling system

pressure cap when the radiator or coolant bottle is hot.

AUTOMATIC TRANSMISSION OVERHEATING

• During sustained high speed driving or trailer towing up long grades on hot days,

the automatic transmission oil may become too hot.

• When the transmission overheat warning light

turns on, you will experience

reduced performance until the automatic transmission cools down. Once the

transmission has cooled down and the light turns off, you may continue to drive

normally. If the high speed is maintained, the overheating will continue to occur.

• If the overheating continues, it may become necessary to stop the vehicle and run

the engine at idle with the transmission in NEUTRAL until the light turns off.

WHAT TO DO IN EMERGENCIES

JACKING AND TIRE CHANGING

Jack Location

• The jack and jack-handle are stowed under the load floor in the cargo area.

Spare Tire Stowage

• The compact spare tire is stowed un-

der the rear load floor in the cargo area.

Spare Tire Removal

• Lift up the load floor cover and remove

the hold down.

Preparations For Jacking

1. Park the vehicle on a firm level sur-

face, avoiding ice or slippery areas.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever in PARK (automatic transmission) or REVERSE (manual

transmission).

5. Turn OFF the ignition.

6. Block both the front and rear of the wheel diagonally opposite the jacking

position. For example, if changing the right front tire, block the left rear wheel.

NOTE:

Passengers should not remain in the ve-

hicle while the vehicle is being jacked.

WHAT TO DO IN EMERGENCIES

Jacking Instructions

NOTE:

Refer to “Tires — General Information” in

“Starting And Operating” in the Owner's

Manual on the DVD for further informa-

tion about the spare tire, it's use, and

operation.

Remove the scissors jack and lug

wrench from the spare wheel as an as-

sembly. Turn the jack screw to the left to

loosen the lug wrench and remove the

wrench from the jack assembly.

2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn

while the wheel is still on the ground.

NOTE:

• There are front and rear jacking locations on each side of the body. The front

locations are outlined by two triangular cutouts, the rear locations by two

rectangular cutouts.

WHAT TO DO IN EMERGENCIES

• For vehicles equipped with plastic trim, the plastic has been cut away to expose

the jacking locations in the body.

• Do not raise the vehicle until you are

sure the jack is securely engaged.

Turn the jack screw to the left until the

jack can be placed under the jacking

location. Once the jack is positioned,

turn the jack screw to the right until the

jack head is properly engaged with the

lift area closest to the wheel to be

changed.

Using the swivel wrench raise the ve-

hicle by turning the jack screw to the

right. Raise the vehicle only until the tire

just clears the surface and enough clear-

ance is obtained to install the spare tire.

Minimum tire lift provides maximum

stability.

5. Remove the wheel nuts and pull the wheel and wheel covers, where applicable,

off the hub. Install the spare wheel and wheel nuts with the cone shaped end of

the nuts toward the wheel. Lightly tighten the nuts.

NOTE:

The wheel cover is held on the wheel by the

wheel nuts. When reinstalling the original

wheel, properly align the wheel cover to the

valve stem, place the wheel cover onto the

wheel, then install the wheel nuts.

6. Lower the vehicle by turning the jack

screw to the left.

7. Finish tightening the nuts. Push down

on the wrench while at the end of the

handle for increased leverage. Tighten

the lug nuts in a star pattern until

each nut has been tightened twice.

The correct wheel nut torque is 100

ft/lbs (135 N·m). If you doubt that you have tightened the nuts correctly, have

them checked with a torque wrench by your authorized dealer or service station.

8. Remove the wheel blocks and lower the jack until it is free. Reassemble the lug

wrench to the jack assembly and stow it in the spare tire area. Secure the

assembly using the means provided.

9. Place the deflated (flat) tire in the cargo area, have the tire repaired or replaced as

soon as possible.

10. Check the spare tire pressure as soon as possible. Correct the tire pressure as

required.

WHAT TO DO IN EMERGENCIES

Road Tire Installation

Vehicles Equipped With Wheel Covers

1. Mount the road tire on the axle.

2. To ease the installation process for steel wheels with wheel covers, install two lug

nuts on the mounting studs which are on each side of the valve stem. Install the

lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the

lug nuts.

3. Align the valve notch in the wheel

cover with the valve stem on the

wheel. Install the cover by hand,

snapping the cover over the two lug

nuts. Do not use a hammer or exces-

sive force to install the cover.

4. Install the remaining lug nuts with the

cone shaped end of the nut toward the

wheel. Lightly tighten the lug nuts.

Lower the vehicle to the ground by turn-

ing the jack handle counterclockwise.

6. Finish tightening the lug nuts. Push

down on the wrench while at the end

of the handle for increased leverage.

Tighten the lug nuts in a star pattern

until each nut has been tightened

twice. The correct tightness of each lug nut is 100 ft/lbs (135 N·m). If in doubt

about the correct tightness, have them checked with a torque wrench by your

authorized dealer or service station.

7. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure

that all lug nuts are properly seated against the wheel.

Vehicles Without Wheel Covers

1. Mount the road tire on the axle.

2. Install the remaining lug nuts with the cone shaped end of the nut toward the

wheel. Lightly tighten the lug nuts.

3. Lower the vehicle to the ground by turning the jack handle counterclockwise.

4. Finish tightening the lug nuts. Push down on the wrench while at the end of the

handle for increased leverage. Tighten the lug nuts in a star pattern until each nut

has been tightened twice. The correct tightness of each lug nut is 100 ft/lbs

(135 N·m). If in doubt about the correct tightness, have them checked with a

torque wrench by your authorized dealer or service station.

5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure

that all lug nuts are properly seated against the wheel.

1 — Valve Stem 4 — Wheel Cover

2 — Valve Notch 5 — Mounting

Stud3 — Wheel Lug

Nut

WHAT TO DO IN EMERGENCIES

CAUTION!

• Do not attempt to raise the vehicle by jacking on locations other than those

indicated in the Jacking Instructions for this vehicle.

• Be sure to mount the spare tire with the valve stem facing outward. The vehicle

could be damaged if the spare tire is mounted incorrectly.

WARNING!

•

Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack

and fall on you. You could be crushed. Never put any part of your body under a

vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service

center where it can be raised on a lift.

•

Never start or run the engine while the vehicle is on a jack.

•

The jack is designed to be used as a tool for changing tires only. The jack should not

be used to lift the vehicle for service purposes. The vehicle should be jacked on a

firm level surface only. Avoid ice or slippery areas.

•

Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull

far enough off the road to avoid the danger of being hit when operating the jack or

changing the wheel.

•

Carefully follow these tire changing warnings to help prevent personal injury or

damage to your vehicle:

•

Always park on a firm, level surface as far from the edge of the roadway as

possible before raising the vehicle.

•

Turn on the Hazard Warning flasher.

•

Block the wheel diagonally opposite the wheel to be raised.

•

Set the parking brake firmly and set an automatic transmission in PARK; a

manual transmission in REVERSE.

•

Do not let anyone sit in the vehicle when it is on a jack.

•

Do not get under the vehicle when it is on a jack.

•

Only use the jack in the positions indicated and for lifting this vehicle during a tire

change.

•

If working on or near a roadway, be extremely careful of motor traffic.

•

To assure that spare tires, flat or inflated, are securely stowed, spares must be

stowed with the valve stem facing the ground.

•

Raising the vehicle higher than necessary can make the vehicle less stable. It could

slip off the jack and hurt someone near it. Raise the vehicle only enough to remove

the tire.

•

To avoid possible personal injury, handle the wheel covers with care to avoid contact

with any sharp edges.

•

A loose tire or jack thrown forward in a collision or hard stop could injure the

occupants in the vehicle. Have the deflated (flat) tire repaired or replaced imme-

diately.

•

To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully

until the vehicle is lowered to the ground. Failure to follow this warning may result

in personal injury.

WHAT TO DO IN EMERGENCIES

JUMP-STARTING PROCEDURES

• If your vehicle has a discharged battery it can be jump-started using a set of

jumper cables and a battery in another vehicle or by using a portable battery

booster pack. Jump-starting can be dangerous if done improperly so please follow

the procedures in this section carefully.

NOTE:

When using a portable battery booster pack follow the manufacturer’s operating

instructions and precautions.

Preparations For Jump-Start

• The battery in your vehicle is located in the front of the engine compartment below

the air intake duct. To access the battery remove the air intake duct by turning the

two finger screws, located on the radiator support.

WHAT TO DO IN EMERGENCIES

1. Set the parking brake, shift the automatic transmission into PARK and turn the

ignition to LOCK.

2. Turn off the heater, radio, and all unnecessary electrical accessories.

3. If using another vehicle to jump-start the battery, park the vehicle within the

jumper cables reach, set the parking brake and make sure the ignition is OFF.

Jump-Starting Procedure

NOTE:

Remove Air Intake before proceeding with this Jump-Starting procedure.

1. Connect the positive (+) end of the jumper cable to the positive (+) post of the

discharged vehicle.

2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post

of the booster battery.

3. Connect the negative end (-) of the jumper cable to the negative (-) post of the

booster battery.

4. Connect the opposite end of the negative (-) jumper cable to a good engine ground

(exposed metal part of the discharged vehicle’s engine) away from the battery and

the fuel injection system.

5. Start the engine in the vehicle that has the booster battery, let the engine idle a

few minutes, and then start the engine in the vehicle with the discharged battery.

Once the engine is started, remove the jumper cables in the reverse sequence:

1. Disconnect the negative (-) jumper cable from the engine ground of the vehicle

with the discharged battery.

2. Disconnect the negative end (-) of the jumper cable from the negative (-) post of

the booster battery.

3. Disconnect the opposite end of the positive (+) jumper cable from the positive (+)

post of the booster battery.

4. Disconnect the positive (+) end of the jumper cable from the positive (+) post of

the discharged vehicle.

5. Reinstall the air intake duct.

If frequent jump-starting is required to start your vehicle you should have the battery

and charging system inspected at your authorized dealer.

WHAT TO DO IN EMERGENCIES

CAUTION!

• Accessories that can be plugged into the vehicle power outlets draw power from

the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).

Eventually, if plugged in long enough, the vehicle’s battery will discharge

sufficiently to degrade battery life and/or prevent the engine from starting.

• Do not use a portable battery booster pack or any other booster source with a

system voltage greater than 12 Volts or damage to the battery, starter motor,

alternator or electrical system may occur.

• Failure to follow these procedures could result in damage to the charging

system of the booster vehicle or the discharged vehicle.

WARNING!

• Do not attempt jump-starting if the battery is frozen. It could rupture or explode

and cause personal injury.

• Take care to avoid the radiator cooling fan whenever the hood is raised. It can

start anytime the ignition switch is on. You can be injured by moving fan

blades.

• Remove any metal jewelry such as watch bands or bracelets that might make

an inadvertent electrical contact. You could be seriously injured.

• Batteries contain sulfuric acid that can burn your skin or eyes and generate

hydrogen gas which is flammable and explosive. Keep open flames or sparks

away from the battery.

• Do not allow vehicles to touch each other as this could establish a ground

connection and personal injury could result.

• Failure to follow this procedure could result in personal injury or property

damage due to battery explosion.

•

Do not connect the cable to the negative post (-) of the discharged battery. The

resulting electrical spark could cause the battery to explode and could result in

personal injury.

WHAT TO DO IN EMERGENCIES

SHIFT LEVER OVERRIDE

If a malfunction occurs and the shift lever cannot be moved out of the PARK position,

you can use the following procedure to temporarily move the shift lever:

1. To access the shift lever override, locate and remove the removable plug in the

right side of the shift lever housing.

2. Firmly set the parking brake.

3. Turn the ignition switch to the ACC or ON position without starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Using a screwdriver or similar tool, press and hold the override tab through the

access port on the center console.

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the override cover.

WHAT TO DO IN EMERGENCIES

TOWING A DISABLED VEHICLE

Model

Flat Towing (all four

wheels on the ground)

Flatbed Towing (all four

wheels suspended OFF the

ground)

Front Wheels Raised, Rear

Wheels on the Ground

Rear Wheels Raised, Front

Wheels on the Ground

FWD Without a Key NOT Permitted Recommended Method May Be Used NOT Permitted

FWD Automatic

Transmission With a Key

NOT Permitted Recommended Method May Be Used NOT Permitted

FWD Manual

Transmission With a Key

May be Used with the

transmission in

NEUTRAL

Recommended Method May Be Used NOT Permitted

AWD Without a Key NOT Permitted Recommended Method NOT Permitted NOT Permitted

AWD Automatic

Transmission With a Key

NOT Permitted Recommended Method NOT Permitted NOT Permitted

AWD Manual

Transmission With a Key

May be Used with the

transmission in

NEUTRAL

Recommended Method NOT Permitted NOT Permitted

WHAT TO DO IN EMERGENCIES

FREEING A STUCK VEHICLE

• If your vehicle becomes stuck in mud, sand or snow, it can often be moved by a

rocking motion. Turn your steering wheel right and left to clear the area around the

front wheels. Then move the shift lever back and forth between REVERSE and

DRIVE. Using minimal accelerator pedal pressure to maintain the rocking motion,

without spinning the wheels, is most effective.

NOTE:

To improve the vehicle's traction when starting off in deep snow, sand or gravel, it

may be desirable to switch the Electronic Stability Control (ESC) to “Partial Off”

mode by momentarily pressing the ESC Off

switch. For further information on

ESC, refer to the Owner's Manual on the DVD.

CAUTION!

• When “rocking” a stuck vehicle by shifting between REVERSE and DRIVE, do

not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may

result.

• Revving the engine or spinning the wheels too fast may lead to transmission

overheating and failure. It can also damage the tires. Do not spin the wheels

above 30 mph (48 km/h) while in gear (no transmission shifting occurring).

WARNING!

Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds

may cause tire damage or failure. A tire could explode and injure someone. Do not

spin your vehicle's wheels faster than 30 mph (48 km/h) when you are stuck. Do

not let anyone near a spinning wheel, no matter what the speed.

WHAT TO DO IN EMERGENCIES

EVENT DATA RECORDER (EDR)

• This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of

an EDR is to record, in certain crash or near crash-like situations, such as an air

bag deployment or hitting a road obstacle, data that will assist in understanding

how a vehicle’s systems performed. The EDR is designed to record data related to

vehicle dynamics and safety systems for a short period of time, typically 30 sec-

onds or less. The EDR in this vehicle is designed to record such data as:

• How various systems in your vehicle were operating.

• Whether or not the driver and passenger safety belts were buckled/fastened.

• How far (if at all) the driver was depressing the accelerator and/or brake pedal.

• How fast the vehicle was traveling.

• These data can help provide a better understanding of the circumstances in which

crashes and injuries occur.

NOTE:

EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no

data is recorded by the EDR under normal driving conditions and no personal data

(e.g. name, gender, age, and crash location) is recorded. However, other parties, such

as law enforcement, could combine the EDR data with the type of personally

identifying data routinely acquired during a crash investigation.

• To read data recorded by an EDR, special equipment is required, and access to the

vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties

such as law enforcement, that have the special equipment, can read the informa-

tion if they have access to the vehicle or the EDR.

WHAT TO DO IN EMERGENCIES

OPENING THE HOOD

1. Pull the release lever located below

the instrument panel and in front of

the driver’s door.

Raise the hood and locate the safety

latch, in the middle of the hood opening.

3. Move the safety latch while lifting the

hood at the same time.

4. Insert the support rod into the slot on

the hood.

5. To close the hood, remove the support

rod and place it in the retaining clip,

then lower the hood slowly.

WARNING!

Be sure the hood is fully latched before driving your vehicle. If the hood is not fully

latched, it could open when the vehicle is in motion and block your vision. Failure

to follow this warning could result in serious injury or death.

MAINTAINING YOUR VEHICLE

ENGINE COMPARTMENT

2.0L Engine

MAINTAINING YOUR VEHICLE

2.4L Engine

MAINTAINING YOUR VEHICLE

FLUIDS AND CAPACITIES

Component

Fluid, Lubricant, or Genuine

Part

Capacities

Engine Coolant – 2.0L,

2.4L Engine

We recommend you use

MOPAR

Antifreeze/

Coolant Ten Year/

150,000 Mile Formula

OAT (Organic Additive

Technology) or equivalent

meeting the requirements

of Chrysler Material

Standard MS-12106.

7.2 Quarts (6.8 Liters)

Includes heater and

coolant recovery bottle

filled to MAX level.

Engine Oil with

Filter – 2.0L, 2.4L Engine

We recommend you use

API Certified SAE 5W-20

engine oil, meeting the

requirements of Chrysler

Material Standard

MS-6395 such as

MOPAR

, Pennzoil

,and

Shell Helix

. Refer to the

engine oil filler cap for

correct SAE grade.

4.5 Quarts (4.26 Liters)

Fuel Selection – 2.0L,

2.4L Engine

87 Octane

13.6 Gallons (51.5 Liters)

(Approximate)

Engine Oil Filter – 2.0L,

2.4L Engine

We recommend you use

MOPAR

Engine Oil Filters.

—

Spark Plugs – 2.0L, 2.4L

Engine

We recommend you use

MOPAR

Spark Plugs

(Gap 0.043 in [1.11 mm])

—

Automatic Transmission

(CVT)

We recommend you use

MOPAR

CVTF + 4

Auto-

matic Transmission Fluid.

—

Automatic Transmission

(Six-Speed)

We recommend you use SK

Energy ATF SP-4

Transmission Fluid.

—

Manual Transmission

We recommend you use

MOPAR

ATF+4

Auto-

matic Transmission Fluid

or equivalent licensed

ATF+4

product.

—

Rear Drive Assembly (RDA)

We recommend you use

MOPAR

Gear & Axle

Lubricant SAE 80W-90

API GL 5.

—

Power Transfer Unit (PTU)

We recommend you use

MOPAR

Gear & Axle

Lubricant SAE 80W-90

API GL 5.

—

MAINTAINING YOUR VEHICLE

Component

Fluid, Lubricant, or Genuine

Part

Capacities

Brake Master Cylinder

We recommend you use

MOPAR

DOT 3,

SAE J1703. If DOT 3 is

not available, then DOT 4

is acceptable.

—

Power Steering Reservoir

We recommend you use

MOPAR

Power Steering

Fluid +4 or MOPAR

ATF+4

Automatic

Transmission Fluid.

—

CAUTION!

• Mixing of engine coolant (antifreeze) other than specified Organic Additive

Technology (OAT) engine coolant (antifreeze), may result in engine damage and

may decrease corrosion protection. Organic Additive Technology (OAT) engine

coolant is different and should not be mixed with Hybrid Organic Additive

Technology (HOAT) engine coolant (antifreeze) or any “globally compatible”

coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into

the cooling system in an emergency, the cooling system will need to be drained,

flushed, and refilled with fresh OAT coolant (conforming to MS-12106), by an

authorized dealer as soon as possible.

• Do not use water alone or alcohol-based engine coolant (antifreeze) products.

Do not use additional rust inhibitors or antirust products, as they may not be

compatible with the radiator engine coolant and may plug the radiator.

• This vehicle has not been designed for use with propylene glycol-based engine

coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze)

is not recommended.

MAINTENANCE SCHEDULE

Your vehicle is equipped with an automatic oil change indicator system. The oil

change indicator system will remind you that it is time to take your vehicle in for

scheduled maintenance.

Based on engine operation conditions, the oil change indicator message will

illuminate. This means that service is required for your vehicle. Operating conditions

such as frequent short-trips, trailer tow, extremely hot or cold ambient temperatures

will influence when the “Change Oil” or “Oil Change Required” message is dis-

played. Severe Operating Conditions can cause the change oil message to illuminate

as early as 3,500 miles (5,600 km) since last reset. Have your vehicle serviced as

soon as possible, within the next 500 miles (805 km).

MAINTAINING YOUR VEHICLE

On Electronic Vehicle Information Center (EVIC) equipped vehicles, “Oil Change

Required” will be displayed in the EVIC and a single chime will sound, indicating that

an oil change is necessary.

On Non-EVIC equipped vehicles, “Change Oil” will flash in the instrument cluster

odometer and a single chime will sound, indicating that an oil change is necessary.

Your authorized dealer will reset the oil change indicator message after completing

the scheduled oil change. If a scheduled oil change is performed by someone other

than your authorized dealer, the message can be reset by referring to the steps

described under “Electronic Vehicle Information Center (EVIC)/Oil Change Re-

quired” in “Understanding Your Instrument Panel” or under “Instrument Cluster

Description/Odometer/Trip Odometer” in “Understanding Your Instrument Panel” for

further information.

NOTE:

Under no circumstances should oil change intervals exceed 10,000 miles

(16,000 km) or twelve months, whichever comes first.

Severe Duty All Models

Change Engine Oil at 4000 miles (6,500 km) if the vehicle is operated in a dusty and

off road environment. This type of vehicle use is considered Severe Duty.

Once A Month Or Before A Long Trip:

• Check engine oil level

• Check windshield washer fluid level

• Check the tire inflation pressures and look for unusual wear or damage

• Check the fluid levels of the coolant reservoir, brake master cylinder, power

steering and fill as needed

• Check function of all interior and exterior lights

Required Maintenance Intervals.

Refer to the maintenance schedules on the following page for the required mainte-

nance intervals.

At Every Oil Change Interval As Indicated By Oil Change Indicator System:

•

Change oil and filter.

• Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil

indicator system turns on.

•

Inspect battery and clean and tighten terminals as required.

•

Inspect brake pads, shoes, rotors, drums, hoses and park brake.

•

Inspect engine cooling system protection and hoses.

•

Inspect exhaust system.

•

Inspect engine air cleaner if using in dusty or off-road conditions.

MAINTAINING YOUR VEHICLE

Maintenance Chart

Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.

Mileage or time passed (whichever comes first)

20,000

30,000

40,000

50,000

60,000

70,000

80,000

90,000

100,000

110,000

120,000

130,000

140,000

150,000

Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Or Kilometers:

32,000

48,000

64,000

80,000

96,000

112,000

128,000

144,000

160,000

176,000

192,000

208,000

224,000

240,000

Additional Inspections

Inspect the CV joints. X X X X X X X

Inspect front suspension, boot seals. tie rod ends, and replace

if necessary.

XXX X X X X

Inspect brake linings, replace if necessary. Check park brake

function, adjust if necessary.

XXX X X X X

Additional Maintenance

Replace engine air cleaner filter. X X X X X

Replace air conditioning/cabin air filter. X X X X X X X

Replace spark plugs** X X X X X

Flush and replace the engine coolant at 10 years or

150,000 miles (240,000 km) whichever comes first.

Replace rear drive assembly (RDA) fluid. X X

Replace power transfer unit (PTU) fluid. X X

Change automatic transmission fluid and filter if using your

vehicle for any of the following: police, taxi, fleet, or frequent

trailer towing. (CVT only)

Change the automatic transmission fluid and filter. (CVT only) X

MAINTAINING YOUR VEHICLE

Mileage or time passed (whichever comes first)

20,000

30,000

40,000

50,000

60,000

70,000

80,000

90,000

100,000

110,000

120,000

130,000

140,000

150,000

Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Or Kilometers:

32,000

48,000

64,000

80,000

96,000

112,000

128,000

144,000

160,000

176,000

192,000

208,000

224,000

240,000

Change the automatic transmission fluid and filter (six-speed

only) if you frequently drive: on rough or unpaved roads, on

mountain roads, on short trips, in heavy city traffic during hot

weather, or if you use the vehicle for police, taxi, fleet, orf re-

quent trailer towing.

Change the manual transmission fluid if using your vehicle for

any of the following: trailer towing, heavy loading, taxi, police,

delivery service (commercial service), off-road, desert operation

or more than 50% of your driving is at sustained high speeds

during hot weather, above 90°F (32°C).

XX X

Inspect and replace PCV valve if necessary. X

** The spark plug change interval is mileage based only, yearly intervals do not apply.

WARNING!

• You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the

right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.

• Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and

performance. This could cause an accident.

MAINTAINING YOUR VEHICLE

MAINTENANCE RECORD

Odometer Date

Signature, Authorized

Service Center

20,000 Miles

(32,000 km) or

2 Years

30,000 Miles

(48,000 km) or

3 Years

40,000 Miles

(64,000 km) or

4 Years

50,000 Miles

(80,000 km) or

5 Years

60,000 Miles

(96,000 km) or

6 Years

70,000 Miles

(112,000 km) or

7 Years

80,000 Miles

(128,000 km) or

8 Years

Odometer Date

Signature, Authorized

Service Center

90,000 Miles

(144,000 km) or

9 Years

100,000 Miles

(160,000 km) or

10 Years

110,000 Miles

(176,000 km) or

11 Years

120,000 Miles

(192,000 km) or

12 Years

130,000 Miles

(208,000 km) or

13 Years

140,000 Miles

(224,000 km) or

14 Years

150,000 Miles

(240,000 km) or

15 Years

MAINTAINING YOUR VEHICLE

FUSES

Integrated Power Module (fuses)

• The Integrated Power Module (fuses) is located in the engine compartment near

the air cleaner assembly. This center contains cartridge fuses and mini-fuses.

Cavity Cartridge Fuse Mini-Fuse Description

1 Empty Empty

2 15 Amp Lt Blue AWD/4WD Control Module – If

Equipped

3 10 Amp Red Rear Center Brake Light Switch

4 10 Amp Red Ignition Switch/Occupant

Classification Module

5 20 Amp Yellow Trailer Tow – If Equipped

6 10 Amp Red Power Mirror/Steering Control

Satellite Radio/Hands-Free Phone

7 30 Amp Green Ignition Off Draw

8 30 Amp Green Ignition Off Draw

9 40 Amp Green Power Seats

10 20 Amp Yellow Power Locks/Interior Lighting

11 15 Amp Lt Blue Power Outlet

12 20 Amp Yellow 115V AC Inverter – If Equipped

13 20 Amp Yellow Cigar Lighter

14 10 Amp Red Instrument Cluster

15 40 Amp Green Radiator Fan

16 15 Amp Lt Blue

Dome Lamp/Sunroof/Rear Wiper Motor

17 10 Amp Red Wireless Control Module

18 40 Amp Green Auto Shutdown Relay

MAINTAINING YOUR VEHICLE

100

Cavity Cartridge Fuse Mini-Fuse Description

19 20 Amp Yellow Radio Amplifiers

20 15 Amp Lt Blue Radio

21 10 Amp Red Intrusion Module/Siren – If Equipped

22 10 Amp Red Heating, AC/Compass

23 15 Amp Lt Blue Auto Shutdown Relay

24 15 Amp Lt Blue Power Sunroof – If Equipped

25 10 Amp Red Heated Mirror – If Equipped

26 15 Amp Lt Blue Auto Shutdown Relay

27 10 Amp Red Airbag Control Module

28 10 Amp Red Airbag Control Module/Occupant

Classification Module

29 Hot Car (No Fuse Required)

30 20 Amp Yellow Heated Seat – If Equipped

31 10 Amp Red Headlamp Washer – If Equipped

32 30 Amp Pink Auto Shutdown Relay

33 10 Amp Red

J1962 Conn/Powertrain Control Module

34 30 Amp Pink Antilock BrakeValve

35 40 Amp Green Antilock Brake Pump

36 30 Amp Pink Headlamp/Washer Control/Smart

Glass – If Equipped

37 25 Amp Natural Diesel Fuel Heater – If Equipped

MAINTAINING YOUR VEHICLE

101

TIRE PRESSURES

• Check the inflation pressure of each tire, including the spare tire, at least monthly

and inflate to the recommended pressure for your vehicle.

• The tire pressures recommended for your vehicle are found on the “Tire and

Loading Information” label located on the driver’s side door opening.

NOTE:

Refer to the Owner's Manual on the DVD

for more information regarding tire warn-

ings and instructions.

WARNING!

• Overloading of your tires is dangerous. Overloading can cause tire failure,

affect vehicle handling, and increase your stopping distance. Use tires of the

recommended load capacity for your vehicle. Never overload them.

• Improperly inflated tires are dangerous and can cause collisions. Under-

inflation is the leading cause of tire failure and may result in severe cracking,

component separation, or “blow out”. Over-inflation reduces a tire’s ability to

cushion shock. Objects on the road and chuck holes can cause damage that

results in tire failure. Unequal tire pressures can cause steering problems. You

could lose control of your vehicle. Over-inflated or under-inflated tires can

affect vehicle handling and can fail suddenly, resulting in loss of vehicle

control.

MAINTAINING YOUR VEHICLE

102

WHEEL AND WHEEL TRIM CARE

• All wheels and wheel trim, especially aluminum and chrome plated wheels,

should be cleaned regularly with a mild soap and water to prevent corrosion.

• To remove heavy soil and/or excessive brake dust, use MOPAR

Wheel Cleaner or

equivalent or select a non-abrasive, non-acidic cleaner.

CAUTION!

Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use

oven cleaner. These products may damage the wheel's protective finish. Avoid

automatic car washes that use acidic solutions or harsh brushes that may damage

the wheel's protective finish. Only MOPAR

Wheel Cleaner or equivalent is

recommended.

EXTERIOR BULBS

LIGHT BULBS – Exterior Bulb Number

Low Beam Headlamp H11

Premium Low Beam Headlamp HIR2

High Beam Headlamp 9005

Premium High Beam Headlamp HIR2

Daytime Running Light (DRL) 3157K

Front Park/Turn Signal 7444NA

Front Side Marker Lamp 194

Front Fog Lamp H11LL

Center High Mounted Stop Lamp (CHMSL) LED Assembly (Serviced at Authorized

Dealer)

Rear Tail/Stop Lamp LED Assembly (Serviced at Authorized

Dealer)

Rear Turn Lamp 7440NA (WY21W) Amber

Backup Lamp 7440 (W21W) Crystal

License Lamp W5W

MAINTAINING YOUR VEHICLE

103

CHRYSLER GROUP LLC CUSTOMER CENTER

P.O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: 1–877–426–5337

CHRYSLER CANADA INC. CUSTOMER CENTER

P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1–800–465–2001 (English)

Phone: 1–800–387–9983 (French)

ASSISTANCE FOR THE HEARING IMPAIRED

• To assist customers who have hearing difficulties, the manufacturer has installed

special TDD (Telecommunication Devices for the Deaf) equipment at its customer

center. Any hearing or speech impaired customer, who has access to a TDD or a

conventional teletypewriter (TTY) in the United States, can communicate with the

manufacturer by dialing 1–800–380–CHRY. Canadian residents with hearing

difficulties that require assistance can use the special needs relay service offered

by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial

1–800–855–0511 to connect with a Bell Relay Service operator.

WARNING!

Engine exhaust, some of its constituents, and certain vehicle components con-

tain, or emit, chemicals known to the State of California to cause cancer and birth

defects, or other reproductive harm. In addition, certain fluids contained in

vehicles and certain products of component wear contain, or emit, chemicals

known to the State of California to cause cancer and birth defects, or other

reproductive harm.

PUBLICATIONS ORDERING

• If you are the first registered retail owner of your vehicle, you may obtain one free

printed copy of the Owner's Manual, Warranty Booklet or Radio Manuals on your

DVD by calling 1–877–426–5337 (U.S.) or 1–800–387–1143 (Canada) or by

contacting your dealer.

•

Replacement User Guide kits or DVDs or, if you prefer, additional printed copies of the

Owner's Manual, Warranty Booklet or Radio Manuals may be purchased by visiting

www.techauthority.com or by calling 1–877–890–4038 (U.S.) or 1–800–387–1143

(Canada). Visa, Master Card, American Express and Discover orders are accepted. If you

prefer mailing your order, please call the above numbers for an order form.

CUSTOMER ASSISTANCE

104

NOTE:

• A street address is required when ordering manuals (no P.O. Boxes).

• The Owner's Manual and User Guide electronic files are also available on the

Chrysler, Jeep, Ram Truck, Dodge and SRT websites.

• Click on the “For Owners” tab, select “Owner/Service Manuals”, then select your

desired model year and vehicle from the drop down lists.

REPORTING SAFETY DEFECTS IN THE UNITED STATES

• If you believe that your vehicle has a defect that could cause a collision or cause

injury or death, you should immediately inform the National Highway Traffic Safety

Administration (NHTSA) in addition to notifying the manufacturer.

• If NHTSA receives similar complaints, it may open an investigation, and if it finds

that a safety defect exists in a group of vehicles, it may order a recall and remedy

campaign. However, NHTSA cannot become involved in individual problems

between you, your authorized dealer and the manufacturer.

• To contact NHTSA, you may either call the Auto Safety Hotline toll free at

1–888–327–4236 (TTY: 1–800–424–9153), or go to http://www.safercar.gov; or

write to: Administrator, NHTSA, 1200 New Jersey Avenue, SE., West Building,

Washington, D.C. 20590. You can also obtain other information about motor

vehicle safety from http://www.safercar.gov.

In Canada

• If you believe that your vehicle has a safety defect, you should contact the

Customer Service Department immediately. Canadian customers who wish to

report a safety defect to the Canadian government should contact Transport

Canada, Motor Vehicle Defect Investigations and Recalls at 1-800-333-0510 or

go to http://www.tc.gc.ca/eng/roadsafety/safedrivers-childsafety-index-53.htm

• French Canadian customers who wish to report a safety defect to the Canadian

government should contact Transport Canada, Motor Vehicle Defect Investigations

and Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/securiteroutiere/

CUSTOMER ASSISTANCE

105

AUTHENTIC ACCESSORIES BY MOPAR®

• The following highlights just some of the many Authentic Jeep Accessories by

MOPAR

featuring a fit, finish, and functionality specifically for your Jeep Patriot.

• In choosing Authentic Accessories you gain far more than expressive style,

premium protection, or extreme entertainment, you also benefit from enhancing

your vehicle with accessories that have been thoroughly tested and factory-

approved.

• For the full line of Authentic Jeep Accessories by MOPAR

, visit your local Jeep

dealership or online at mopar.com.

EXTERIOR:

• Front & Rear Tow Hooks • Sunroof Air Deflector • Front Air Deflector

• Hitch Receiver • Rear Air Deflectors • Molded Splash Guards

• Fog Lights • Vehicle Cover • Off Road Lights

• Tent Kit

INTERIOR:

• Carpet Floor Mats • Door Sill Guards • Bright Pedal Kit

• Slush Mats • Ambient Light Kit • Heated Seats

• Katzkin Leather Interiors • Dog Bed • Cargo Nets

• Seat Covers • Shift Knob

• Roadside Safety Kit

ELECTRONICS:

• iPod

Adapter • MOPAR

Connect (WiFi) • Remote Start

• Kicker

Sound System • Upgrades • Electronic Vehicle

Tracking System (EVTS)

• Ecometer • Uconnect

Phone

CARRIERS:

• Hitch-mount Bike Carrier • Bike Carrier • Roof Box Cargo Carrier

•

Ski and Snowboard Carrier

• Water Sports Carrier • Canoe Carrier

• Roof Top Cargo Carrier • Sport Utility Bars

• iPod

is a registered trademark of Apple, Inc.

• Kicker

is a registered trademark of Stillwater Designs and Audio, Inc.

MOPAR® ACCESSORIES

106

Airbag..................13

Air Conditioning ............29

Air Recirculation..........28,29

Alarm,Panic ..............10

Alarm (Security Alarm).........11

Arming System (Security Alarm) . . .11

Audio Jack ........35,38,41,46

Audio Settings ........34,37,39

Audio Systems (Radio).........34

Automatic Temperature

Control (ATC)

.............29

Automatic Transmission ........27

FluidType .............94

Overheating ............78

AxleFluid................94

Belts, Seat ...............12

Brake Fluid ...............94

Break-In Recommendations,

New Vehicle .............22

BulbReplacement..........103

Calibration,Compass .........63

CD (Compact Disc)

Player .........35,38,41,45

ChangeOilIndicator..........77

ChangingAFlatTire..........79

Child Restraint .............14

Climate Control .............28

Clock Setting .......34,36,39,42

Compass Calibration ..........63

Cooling System

Coolant Capacity ..........94

Cruise Control (Speed Control) ....25

CruiseLight...............25

Customer Assistance .........104

Defects, Reporting ..........105

Dimmer Control .............23

Dimmer Switch, Headlight ......23

Disarming, Security System ......12

Electronics

Your Vehicle's Sound

System .............32,33

Electronic Speed Control

(Cruise Control) ...........25

Electronic Stability Control (ESC) . .73

Electronic Vehicle Information

Center (EVIC) ............63

Emergency, In Case of

Brake Warning Light .......75

Jacking ...............79

Jump Starting ...........84

Overheating ............78

Engine

Break-In Recommendations . . .22

Compartment ...........92

Jump Starting ...........84

Oil Selection ............94

Overheating ............78

Event Data Recorder ..........90

Exterior Lights.............103

Flash-To-Pass ..............23

Fluid Capacities ............94

Fluids..................94

FogLights .............22,23

Folding Front Passenger Seat .....19

FoldingRearSeat ...........20

Four Wheel Drive Operation ......70

Freeing A Stuck Vehicle ........89

Front Heated Seats...........20

Front Wipers

Mist .................24

Fuel

Filler Cap (Gas Cap) ........77

Specifications ...........94

Garage Door Opener (HomeLink

) . .65

Gas Cap (Fuel Filler Cap) .......77

GPS Navigation (Uconnect

gps). . .51

Hard Drive (HDD)............46

Headlights................22

Dimmer Switch ..........23

HighBeam .............23

Heated Mirrors ...........28,29

Heated Seats ..............20

High Beam/Low Beam Select

(Dimmer) Switch ........22,23

HomeLink

(Garage Door Opener) . .65

Hood Release ..............91

Instrument Cluster

Indicators ..............9

INDEX

107

Instrument Cluster Warning Lights . . .8

Interior and Instrument Lights . . .6, 7

Intermittent Wipers (Delay Wipers) . .24

Introduction ...............2

Inverter Outlet (115V) .........68

Inverter, Power .............68

iPod

/USB/MP3 Control ........56

Bluetooth

Streaming Audio . . .62

Jacking Instructions ..........80

Jack Location ..............79

Jack Operation ...........79,80

Jump Starting..............84

KeyFob.................10

Key Fob Programmable Features . . .64

LaneChangeandTurnSignals....23

Lane Change Assist ..........23

Lap/Shoulder Belts ...........12

LATCH (Lower Anchors and Tether for

CHildren)..........14,15,16

Lights

Engine Temperature Warning . . .75

Headlights .............22

Park .................22

Tire Pressure Monitoring

(TPMS) ...............73

Transmission Warning .......77

TurnSignal ..........22,23

Warning (Instrument Cluster

Description) .............8

Locks

Liftgate, Tailgate ..........10

Maintenance Record ..........99

MaintenanceSchedule ........95

Malfunction Indicator Light

(CheckEngine) ...........75

Media Center Radio ........39,42

MOPAR

Accessories.........106

Navigation................49

Navigation System

(Uconnect

gps) ..........49

Navigation Voice Prompt Volume . . .49

New Vehicle Break-In Period .....22

Oil Change Indicator ..........77

Oil, Engine

Capacity ..............94

Outlet

Power ................69

Overheating, Engine ..........78

Panic Alarm ...............10

Phone (Uconnect

) ..........57

Placard, Tire and Loading

Information.............102

Power

Inverter ...............68

Outlet (Auxiliary Electrical

Outlet) ...............69

Seats ................18

Steering ..............94

Power Sunroof .............30

Preparation for Jacking ........79

Programmable Electronic Features . .63

Radio Operation .....35,37,40,44

Rain Sensitive Wiper System .....24

RearSeat,Folding...........20

Rear Wiper/Washer ...........24

Recreational Towing ..........72

Remote Starting System ........11

Replacement Bulbs..........103

Reporting Safety Defects.......105

RollOverWarning............5

Satellite Radio (Uconnect

studios)...........36,38,40

Schedule,Maintenance........95

Seat Belts ................12

Seats...................18

Adjustment .............18

Folding Front Passenger .....19

Heated ...............20

Power ................18

RearFolding ............20

Shift Lever Override ..........87

Signals, Turn ..............23

SIRIUS Travel Link ...........52

SpareTire................79

SparkPlugs...............94

Speed Control

Accel/Decel ............25

INDEX

108

Cancel ...............26

Resume ...............26

Set .................25

Starting

Remote ...............11

Steering

TiltColumn .............21

Steering Wheel Audio Controls ....56

Supplemental Restraint

System - Airbag ...........13

Tilt Steering Column ..........21

Tires

Air Pressure ...........102

Changing ..............79

Jacking ...............79

SpareTire .............79

Touchscreen Radio

Audio Settings ...........43

Cleaning Your Touchscreen

Radio ................48

Towing..................72

Disabled Vehicle ..........88

Recreational ............72

Trailer Towing

Trailer and Tongue Weight ....72

Trailer Weight ..............72

Transmission

Automatic .............27

Fluid ................94

TurnSignals...............23

Uconnect

VoiceCommand......60

Vehicle Security Alarm Arming ....11

Vehicle Security Alarm Disarming . .12

Voice Command ............60

Voice Prompt Volume

Navigation ..............49

Volume

Navigation Voice Prompt .....49

Warning, Roll Over ............5

Washer

Rear .................24

Washers, Windshield ..........24

WheelandWheelTrimCare.....103

Wind Buffeting .............31

Windshield Washers ..........24

Windshield Wipers ...........24

Wiper,Rear...............24

INDEX

109

FREQUENTLY ASKED QUESTIONS

GETTING STARTED

• How do I install my LATCH Equipped Child Seat? pg. 14

• How do my heated seats operate? pg. 20

ELECTRONICS

• Which radio is in my vehicle?

• Uconnect

130 pg. 34

• Uconnect

130 with Satellite Radio pg. 36

• Uconnect

230 pg. 39

• Uconnect

430/430N pg. 42

• How do I activate the Audio Jack?

• Uconnect

130 pg. 41

• Uconnect

130 with Satellite Radio pg. 41

• Uconnect

230 pg. 41

• Uconnect

430/430N pg. 46

• How do I set the clock on my radio?

• Uconnect

130 pg. 39

• Uconnect

130 with Satellite Radio pg. 39

• Uconnect

230 pg. 39

• Uconnect

430/430N pg. 42

• How do I use the Navigation feature? pg. 49

• How do I pair my cell phone via Bluetooth

with the Uconnect

Hands-Free Voice

Activation System? pg. 58

• How do I configure my Universal Garage Door Opener (HomeLink

)? pg. 65

UTILITY

• How do I know how much I can tow with my Jeep Patriot? pg. 72

WHAT TO DO IN EMERGENCIES

• What do I do if my TPMS warning light is blinking? pg. 73

• How do I change a flat tire? pg. 79

• How do I Jump-Start my vehicle? pg. 84

MAINTAINING YOUR VEHICLE

• Where is my Fuse Block located? pg. 100

• What type of oil do I use? pg. 94

• How often should I change my engine’s oil? pg. 95

• What should my tire pressure be set at? pg. 102

FAQ (How To?)

110

NOTES

111

NOTES

112