Assembly Instructions
MADERA
Extendable Dining Table
VERSION 1.1
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
MADERA Extendable
Dining Table
Page 2 of 7
30 min
3
PARTS INVENTORY
ID DESCRIPTION QTY
CENTER BAR 1
CENTER BAR ATTACHMENT 1
CENTER BAR BRACKET 1
LEGS 2
EXTENSION LEAF 2
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 2
M8 × 20MM BOLT 1
M8 LOCK WASHER 17
M8 WASHER 17
M8 × 30MM BOLT 16
M6 × 20MM BOLT 2
M6 LOCK WASHER 2
M6 WASHER 2
NUT 2
SOCKET WRENCH 1
TIME # OF PEOPLE DIFFICULTY
Page 3 of 7
1A
1B
!
First unscrew bolt (G) out of
center bar attachment (B).
!
MADERA Extendable
Dining Table
Page 4 of 7
2
!
× 8
MADERA Extendable
Dining Table
3A
Page 5 of 7
4
3B
!
× 2
MADERA Extendable
Dining Table
Put center bar (A) in hole in leg (D)
before bolting leg to table top.
!
× 8
Page 6 of 7
6
5
Secure nuts (N) on both ends of center
bar after legs are bolted to table top.
!
× 2
MADERA Extendable
Dining Table
Dowels on extension leaves (E) fit into
holes at the end of each extension arm.
!
Page 7 of 7
MADERA Extendable
Dining Table
If bolts are too loose: arms can extend too far and come out of the table completely.
If bolts are too tight: arms will not extend far enough to align with dowels on leaf.
!
EXTENSION LEAF ADJUSTMENT INSTRUCTIONS
If the dowels on one or both of your extension leaves
don’t fit properly into the extension arms, the bolts on
the arms underneath the table top need to be adjusted.
Loosen the bolts to move the arms farther out from the
table, and tighten to move the arms farther inward.
Start with adjusting the bolt on the back of the arm: If needed, adjust these bolts from below:
