1
teknion expansion casegoods january 2021
2
THIS DOCUMENT THIS DOCUMENT DOES NOT DOES NOT REPLACE THE APPLICATION REPLACE THE APPLICATION
GUIDELINES. IT HAS BEEN CREATED TO HELP YOU WORK GUIDELINES. IT HAS BEEN CREATED TO HELP YOU WORK
WITH EXPANSION CASEGOODS PRODUCTS BY PROVIDING WITH EXPANSION CASEGOODS PRODUCTS BY PROVIDING
SPECIFICATIONS TIPS AND WARNING. IT MUST BE USED FOR SPECIFICATIONS TIPS AND WARNING. IT MUST BE USED FOR
TRAINING PURPOSES ONLY.TRAINING PURPOSES ONLY.
THE INFORMATION PROVIDED BY THE APPLICATION THE INFORMATION PROVIDED BY THE APPLICATION
GUIDELINE ALWAYS PREDOMINATES THIS ONE IN CASE OF GUIDELINE ALWAYS PREDOMINATES THIS ONE IN CASE OF
DISCREPANCY.DISCREPANCY.
CLICK HERECLICK HERE TO CONSULT THE EXPANSION CASEGOODS TO CONSULT THE EXPANSION CASEGOODS
APPLICATION GUIDELINES FOR MORE DETAILS AND APPLICATION GUIDELINES FOR MORE DETAILS AND
RESTRICTIONS ABOUT THE PRODUCTS. RESTRICTIONS ABOUT THE PRODUCTS.
WARNINGWARNING
Expansion Casegoods | Specication Tips
3
TABLE OF CONTENT
Expansion Casegoods | Specication Tips
Simply click on the title of a section
to access it.
**
QUICK TIPQUICK TIP
CHOOSING THE RIGHT HA SOLUTION ............................................. 4
MULTI-LEVEL HEIGHT-ADJUSTABILITY ............................................ 5
SECONDARY DESK FOR HEIGHT-ADJUSTABILITY ....................... 6
MID-HEIGHT HEIGHT-ADJUSTABILITY ............................................. 9
HA SURFACES FOR MID-HEIGHT ........................................................... 11
FREESTANDING STORAGE FOR MID-HEIGHT ............................... 13
MODESTY .......................................................................................................... 14
WALL PANELS OVERVIEW ......................................................................... 15
OVERHEAD CABINET ................................................................................. 19
WALL PANEL MOUNTED ACCESSORY ................................................. 21
VALIDATION CHECK LIST ......................................................................... 22
4
CHOOSING THE RIGHT HA SOLUTION
Expansion Casegoods | Specication Tips
□ Sit-to-stand workwall application
□ Full knee clearance
□ Fully-modular, xed workwall credenza
□ 2 levels of height (High or Low)
□ No wall anchor required
□ Storage-based application
□ Cost-effective, built-in storage
□ No wall anchor required
Height: 17
1/4
’’
Depth: 20’’ or 24’’
HA range: 26’’ to 48’’
Height: 26
3/4
’’
Depth: 20’’ or 24’’
HA range: 29’’ to 48’’
Height: 21’’
Depth: 20’’ or 24’’
HA range: 26’’to 48’’
KNEESPACE MODULEKNEESPACE MODULE
Mid-HeightMid-Height
SECONDARY DESK
HighHigh or LowLow
CREDENZA FOR HA
Mid-HeightMid-Height
LOWLOW
HIGHHIGH
Height: 21''
Depth: 9''
HA range: 26’’ to 48’’
Must be anchored to the wall.
**
WARNINGWARNING
Accessories with Desk Edge Clamp cannot be
specied over a High Secondary Desk.
**
WARNINGWARNING
5
MULTI-LEVEL HEIGHT-ADJUSTABILITY
Expansion Casegoods | Specication Tips
Display with
Up/Down
Memory
(D)
Toggle Up/
Down
(F, G or H)
Display
Toggle with
Memory
(M, N or O)
HEIGHT-ADJUSTABLE RANGE
Low Secondary Desk Low Secondary Desk and Mid-HeightMid-HeightHigh Secondary DeskHigh Secondary Desk
48'' h48'' h
(Max. Height)(Max. Height)
48'' h48'' h
(Max. Height)(Max. Height)
29'' h29'' h
(Min. Height)(Min. Height)
26'' h26'' h
(Min. Height)(Min. Height)
19'' Adjustement Range19'' Adjustement Range
22'' Adjustement Range22'' Adjustement Range
POWERBAR OPTION
(P) Integrated with IEC
◦ IEC Outlet allows to plug a Power Cube (JENPC) in the Powerbar
◦ Especially relevant with Facing Down power configuration.
◦ Allows access to up to 6 outlets per user using only one outlet from
the beam (3 over worksurface and 3 under worksurface).
(I) Integrated(P) Integrated with IEC
Allows installation of a Power Cube
with IEC Connector
(N) None
(P) Integrated with IEC is only
available on HA Worksufaces for
Mid-Height at the moment.
Will be available on every HA
Worksurfaces after May 2021 update.
**
WARNINGWARNING
SWITCH OPTION
6
SECONDARY DESK FOR HEIGHT-ADJUSTABILITY
Expansion Casegoods | Specication Tips
B_ASR
Secondary Desk for Height-Adjustable
RUN-OFF AND L-SHAPE DESK
PRODUCT OPTIONS
NOTES
◦ Multi-Functional Drawer cannot be used with this product.
B_ARHB
HA Run-Off
B_ARLB
HA Run-Off
BGATHB
HA Run-Off
with Glass Top
BGATLB
HA Run-Off
with Glass Top
B_AUHB
HA L-Shape
Desk for U-Shape
Workstation
B_AULB
HA L-Shape
Desk for U-Shape
Workstation
With Run-Off With L-Shape
Height-Adjustable Height-Adjustable
Worksurface DepthWorksurface Depth
HIGH HIGH
(H)(H)
LOWLOW
(L)(L)
B_ASP
Secondary Desk for Height-Adjustable
PENINSULA
PRODUCT OPTIONS
NOTES
◦ Multi-Functional Drawer cannot be used with this product.
◦ When 35" or 41" deep Height-Adjustable Peninsula is selected, 00" Worksurface
Position is not available.
B_APHP
HA Peninsula
B_APLP
HA Peninsula
B_ATHP
HA Tapered
Peninsula
B_ATLP
HA Tapered
Peninsula
B_AEHP
HA Extended
Tapered Peninsula
B_AELP
HA Extended
Tapered Peninsula
HIGH HIGH
(H)(H)
LOWLOW
(L)(L)
With Run-Off With L-Shape
Height-Adjustable Height-Adjustable
Peninsula DepthPeninsula Depth
COMPATIBILE WITH
COMPATIBILE WITH
7
B_ASLP
Secondary Desk for Height-Adjustable
L-SHAPE WORKSURFACE
PRODUCT OPTIONS
NOTES
◦ Multi-Functional Drawer cannot be used with this product.
With L-Shape
B_ALHB
HA L-Shape
Run-Off
B_ALLB
HA L-Shape
Run-Off
B_ALHP
HA L-Shape
Peninsula
B_ALLP
HA L-Shape
Peninsula
B_ALHT
HA Extended L-Shape
Tapered Peninsula
B_ALLT
HA Extended L-Shape
Tapered Peninsula
COMPATIBILE WITH
HIGH HIGH
(H)(H)
LOWLOW
(L)(L)
WORKSURFACE POSITIONNING
WEIGHT CAPACITY FOR HEIGHT-AJUSTABILITY
Worksurfaces for High or Low Secondary Desk
◦ Run-Off: 200 lbs*
◦ Freestanding Desk: 200 lbs*
◦ Peninsula, Tapered Peninsula, Extended Tapered Peninsula,
L-Shape Worksurfaces and L-Shape Desks: 300 lbs*
◦ Run-Off with Glass Top with Mechanism: 100 lbs*
Worksurfaces for Mid-Height: 150 lbs*
Note: Load must not exceed 100 lbs on a single motor. All additions
on Height-Adjustable Worksurfaces must be considered (ie: Computer,
Keyboard Support, Display, Monitor Arm, Privacy Screen, Modesty
Panel, Casual Drawer and other accessories...)
Click here to consult the Weights & Volumes document.
**
WARNINGWARNING
Height-Adjustable Height-Adjustable
Worksurface DepthWorksurface Depth
Worksurface Position
(From Left)
00, 06, 12, 18, 24, 30,
36, 42, 48, 54, 60, 66,
72, 78, 84
2D drawings in AutoCad are very precise. It allows you to validate the alignment between the surface and the cut-out.
**
QUICK TIPQUICK TIP
8
UNSUPPORTED SPAN
STORAGE FOR SECONDARY DESKS
66'' max66'' max 66'' max66'' max
84'' max84'' max
84'' max84'' max
BSSO
Bookcase
for Secondary Desk
Width: 18, 24, 30, 36 or 42''
BSSM
Multi-Functional Storage for
Secondary Desk
Width: 24, 30 or 36''
BSSD
Storage Cabinet for Secondary Desk
Width: 18, 24, 30, 36 or 42''
BSSP
Stretch Pedestal for Secondary Desk
Width: 18''
* Can't be use In Front of HA Mechanism
BSSRW
Recycling/Waste Cabinet for
Secondary Desk
Width: 18''
BSSL
Recycling/Waste Cabinet for
Secondary Desk
Width: 18, 24, 30, 36 or 42''
* Can't be use In Front of HA Mechanism
Loaded Rule Loaded Rule
Unloaded Rule Unloaded Rule
Compatible with High High and Low Low Secondary Desk
Compatible with High High Secondary Desk Only
PRODUCT OPTIONS
BSSCM
Cover for HA Mechanism
Width: 18'' to 78'' (+6'' incr.)
* Always required in front of HA
mechanism when no storage is specied.
PRODUCT OPTIONS
Cover for Height-Adjustable Mechanism BSSCM is not structural and therefore cannot be used to reduce the unsupported span.
**
WARNINGWARNING
9
MID-HEIGHT MID-HEIGHT HEIGHT-ADJUSTABILITY
Expansion Casegoods | Specication Tips
PRODUCT OPTIONS
PRODUCT OPTIONS
BHKHA
Mid-Height Kneespace Module
for Height-Adjustability
BHKFH
Mid-Height Kneespace Module for
Height-Adjustability and Fixed Run-Off
On Module only. Must always be specied 2’’
wider than the surface installed on to provide 1’’ gaps
on both sides.
BH_WB
BH_WB
BH_LT BH_L BH_LB
BH_CB
BH_CB
+
BM_R
BH_EP
COMPATIBLE WITH
FRONT PANELS
FRONT PANELS
COMPATIBLE WITH
BH_MT
=
24''24''
24''24'' 33'' 33'' 30''30''
30''30''
30'' 30''
58''
42'' WIDTH 90'' WIDTH
= = =
**
WARNINGWARNING
= = = =
XX''
XX''
10
BH_RB
BH_RB
BH_PT
BH_PT
BH_PP
BH_PP BH_PP
BSMLHR
Mid-Height Credenza for Height-Adjustable
Run-Off – Open and DrawersRun-Off – Open and Drawers
BSMCHR
Mid-Height Credenza for Height-Adjustable
Run-Off – Open Combo Run-Off – Open Combo
BSMLHP
Mid-Height Credenza for Height-Adjustable
Peninsula – Open and Drawers Peninsula – Open and Drawers
BSMCHP
Mid-Height Credenza for Height-Adjustable
Peninsula – Open Combo Peninsula – Open Combo
PRODUCT OPTIONS
PRODUCT OPTIONS
PRODUCT OPTIONS
PRODUCT OPTIONS
COMPATIBLE WITH
COMPATIBLE WITH
COMPATIBLE WITH
COMPATIBLE WITH
CONFIGURATION
Open
Section
Return
46'' or 52'' d
Open
Section
Open
Section
The Recycling/Waste Cabinet
or Storage section is more
difcult to access, because the
surface covers completely the
storage access.
60'' to 66'' (If 29'' deep Run-Off) or
66'' to 72'' (If 35'' deep Run-Off)
60'' to 66'' (If 29'' deep Run-Off) or
66'' to 72'' (If 35'' deep Run-Off)
**
WARNINGWARNING
**
**
QUICK TIPQUICK TIP
QUICK TIPQUICK TIP
11
BH_WB or BH_CB
H-A Rectangular Worksurface – Mid-Height
PRODUCT OPTIONS
BH_WB BH_CB
HA SURFACES FOR MID-HEIGHTMID-HEIGHT
Expansion Casegoods | Specication Tips
COMPATIBLE WITH
BHKHA BHKFH
24'' 27'' 30''
24''24'' 27''27''
18'' 21''
21''21''
15''
DEPTH
PRODUCT OPTIONS
BM_R
Fixed Run-Off for Mid-Height
Kneespace Module
COMPATIBLE WITH SUPPORT STYLE
BHKFH
THREE POSITIONS
Aligned to adjacent H-A Rectangular
Worksurface – Mid-height
Against a Wall Panel Aligned to 29" Freestanding Storage back
3'' gap 3'' gap 1'' gap1'' gap No gapNo gap
On Module only. Always 2'' shorter
than the width of the module to provide
1'' gap on both sides.
**
WARNINGWARNING
12
H-A Run-Off
for Mid-Height
H-A Peninsula
for Mid-Height
H-A Meeting Peninsula
for Mid-Height
H-A Extended Tapered Peninsula
for Mid-Height
H-A L-Shape Worksurface
for Mid-Height
H-A Tapered Peninsula
for Mid-Height
BSMLHRBH_RB
BH_PP
BH_PT
BH_MT
Compatible
with
Compatible
with
Compatible
with
Compatible
with
Compatible
with
Compatible
with
BSMCHR
BSMLHP
BSMLHP
BSMLHP
BSMCHP
BSMCHP
BSMCHP
BHKHA
BHKHA
BHKHA
BH_EP
BH_LB BH_L BH_LT
COMPATIBILITY WITH HA WORSURFACES
HA SURFACES FOR MID-HEIGHT MID-HEIGHT (SUITE)
Expansion Casegoods | Specication Tips
13
PRODUCT OPTIONS
PRODUCT OPTIONS
APPLICATIONS
APPLICATIONS
BSMPS
Mid-Height Stretch Pedestal
BSMLS
Mid-Height Credenza – Open and Drawers
9''
20''20''
24''24''
20''20''
30''
9''
17''17''
21''21'' 27''27''
9''
18''
18'18''
27''27''
9''9''
42''42''
Perpendicular to a Worksurface: the open section should be oriented under the Worksurface.
When a 42" Mid-Height Credenza is specied perpendicular
to a 27" deep Worksurface, a small portion of the drawers will
be under the Worksurface.
FREESTANDING STORAGE FOR MID-HEIGHTMID-HEIGHT
Expansion Casegoods | Specication Tips
14
MODESTY
Expansion Casegoods | Specication Tips
Start from the width of the Worksurface
(without the mandatory 1 inch gap) to
calculate the lenght of the modesty panel.
**
QUICK TIPQUICK TIP
15
B_WPA
Wall Panel
WALL PANELS OVERVIEW
Expansion Casegoods | Specication Tips
RESTRICTION WITH HA
The bottom shelf on Wall Panel cannot be specied over a height adjustable
worksurface because the shelves may come into conict.
Power option cannot be specied on a wall pannel next to a HA worksurface.
**
**
WARNINGWARNING
WARNINGWARNING
The bottom shelf on Wall Panel cannot
be specied right next to or over a Height
Adjustable Worksurface because the shelf may
come into conict.
**
WARNINGWARNING
PRODUCT OPTIONS
COMPATIBLE WITH
High and Low
Secondary Desk
Mid-Height
Kneespace Module
Mid-Height
Credenza
Feestanding Storage
with Integral Top
Mid-Height
Stretch Pedestal
21''21''21''
17''
or
27''
29''
16
Top Shelf aligned with
Standard Standard Overhead Cabinet
Top Shelf aligned with
Cubic Cubic Overhead Cabinet
51''h or 58''h51''h or 58''h
50''h or 54''h50''h or 54''h
66''h or 72''h 66''h or 72''h
Teknion does not recommend the use of any Shelves or Overhead Cabinets above the Height-Adjustable Worksurfaces. Damages or
personal injuries may occur if accessories are positioned beneath the shelf.
**
WARNINGWARNING
B_WPL
Wall Panel with Open Shelves
PRODUCT OPTIONS
TOP SHELF ALIGNEMENT WITH OVERHEADS
CAN BE MOUNTED ON
High and Low
Secondary Desk
Mid-Height
Kneespace Module
Mid-Height
Credenza
Feestanding Storage
with Integral Top
Mid-Height
Stretch Pedestal
21''21''21''17''
or
27''
29''
* Laminate Shelves comes
with the Wall Panel
17
B_WPM
Wall Panel for Metal Accessory Shelves
PRODUCT OPTIONS
* Metal Accessory Shelf for
Wall Panel (BBMAS) must
be specied separately.
A metal shelf can be placed next to
of a Standard Overhead Cabinet but
the bottom shelf will not aligned with
bottom Standard Overhead Cabinet
**
WARNINGWARNING
TOP SHELF ALIGNEMENT
3D POSITIONING OF METAL ACCESSORY SHELVES
Top Shelf aligned with
Cubic Cubic Overhead Cabinet
50''h or 54''h50''h or 54''h
66''h or 72''h
High and Low
Secondary Desk
Mid-Height
Kneespace Module
Mid-Height
Credenza
Mid-Height
Stretch Pedestal
21''21''21''17''
or
27''
When converting your layout in 3D, both top and bottom shelves will appear at the same position. You need to bring it down in order to see
both shelves and obtain an accurate 3D drawung.
**
QUICK TIPQUICK TIP
CAN BE MOUNTED ON
Wall Pannel 72'' high
Top Shelf: 0 unit
Bottom Shelf: -18 units
Wall Pannel 66'' high
Top Shelf: -3.8 units
Bottom Shelf: -18.7 units
Teknion does not recommend the use of any Shelves or Overhead Cabinets above the Height-Adjustable Worksurfaces. Damages or
personal injuries may occur if accessories are positioned beneath the shelf.
**
WARNINGWARNING
18
B_WPO
Wall Panel for Overhead Cabinet
PRODUCT OPTIONS
COMPATIBLE WITH
STANDARD STANDARD OVERHEADSOVERHEADS
CUBIC CUBIC OVERHEADSOVERHEADS
High and Low
Secondary Desk
Feestanding Storage
with Integral Top
17''
or
27''
29''
CAN BE MOUNTED ON
Mounting Style W Wall Panel Mounted
must be specied on the Overhead in order to
be compatible.
**
WARNINGWARNING
19
OVERHEAD CABINET
Expansion Casegoods | Specication Tips
DOOR GLASS FINISH
STANDARDSTANDARD
Overhead CabinetOverhead Cabinet
Frame Less Look
When Back-Painted glass nish
is specied, the glass is glued
to the frame for a frameless
appearance.
Framed
When Clear (CL) or Frosted
(FT) glass nish is specied, the
door is framed.
Flush Front Look with 18"
deep Overhead Cabinet
A ush front look can be achived
using a BOCSS, BOCSG and
BOCLO in combination with 18"
deep Freestanding Tower (Wall Panel
Mounted only).
PRODUCT OPTIONS
18'' d18'' d
(15''h)(15''h)
18'' d18'' d
FLUSH FRONT WITH TOWER
ACTUAL HEIGHT
1818
(BOCLO)(BOCLO)
(BOCSS)(BOCSS)
(BOCSG)(BOCSG)
1515
**
QUICK TIPQUICK TIP
NOTES
◦For the Wall Panel Mounted Style, specify the width according to the width of the Wall Panel for Overhead.
◦Top for Overhead Cabinet (B_OT) cannot be installed on this product.
**
18'' depth is only available with
BOCSS, BOCSG and BOCLO
WARNINGWARNING
20
CUBICCUBIC
Overhead Cabinet
ACTUAL HEIGHT
Flush Front Look
◦ A ush front look can be achieved using a cubic
overhead cabinet in combination with 18" deep
Freestanding Tower.
◦ Included linking hardware guarantees best t and
nish.
Only applicable with
66" high wall panel 66" high wall panel
Only applicable with
72" high wall panel72" high wall panel
**
QUICK TIPQUICK TIP
(16''h)(16''h) (18''h)(18''h)
PRODUCT OPTIONS
1616 1818
NOTES
◦ For the Wall Panel Mounted Style, specify the width according to the width
of the Wall Panel for Overhead.
◦ Top for Overhead Cabinet (B_OT) cannot be installed on this product.
18'' d18'' d
18'' d18'' d
21
BBWAT
Fabric Tackboard -
Wall Panel Mounted
BBWAE
Felt Tackboard - Wall
Panel Mounted
BBWAM
Glass Tackboard -
Wall Panel Mounted
PRODUCT OPTIONS
WALL PANEL MOUNTED ACCESSORY
Expansion Casegoods | Specication Tips
With Fabric Tackboard (BBWAT), when
From Mid-Height option (K) is specied
72" height, only 24" to 42" widths are
available.
**
WARNINGWARNING
With Mid-Height, you can also specify Starting Height From High Secondary Desk (H) in order to avoid the width
restrictions noted above.
With Low Secondary Desk, use Starting Height (M), (H) or (R).
** QUICK TIPQUICK TIP
STARTING HEIGHTSTARTING HEIGHT
DATUM HEIGHTDATUM HEIGHT
WITH STANDARD OVERHEAD CABINETS WITH CUBIC OVERHEAD CABINETS
66'' High Panels 66'' High Panels72'' High Panels 72'' High Panels
66''66''
66''66''
72''72''
72''72''
51''51''
50''50''
58''58''
54''54''
22
SECONDARY DESK
WORKSURFACE
HEIGHT-ADJUSTABILITY
WALL PANEL
TACKBOARD
LIGHT SHELF
OVERHEAD
STORAGE FOR SECONDARY DESK
GENERAL VALIDATION
VALIDATION CHECK LIST
Expansion Casegoods | Specication Tips
□ Unsupported Span
Loaded (with WallPanel for Overheads or with Mounted Towers) 66’’ maximum.
Unloaded (with or without Wall Panel) 84’’ maximun.
□ Modesty Panel Lenght (Refer top Modesty section of this document).
□ Worksurface match the secondary desk configuration (High or Low).
□ Worksurface and Base height must be the same (H for High, L for Low and M for Mid-Height).
□ 1'' safety gap mandatory all around HA Worksurace.
□ Worksurface is aligned with the cut-out of the Secondary Desk it's mounted on.
□ No interferance with HA Worksurface and Overheads, Shelves or Drawers.
□ Mounting Style option match the desk it’s mounted on.
□ Overhead Configuration (Cubic or Standard) if applicable.
□ Power option in the wall pannel is not specified in front of a HA Worksurface.
□ Starting Height match the desk underneath (From Accessory Rail (R) if electricity is specified on the Wall Panel).
□ Datum Height match the Overhead if applicable.
□ Mounting Style (Wall panel, Wall Panel for Overhead Cabinet or Wall Mounted).
□ Make sure the Accessory Rail is specified on the Wall Panel.
□ One Light Shelf cannot span across two Wall Panels.
□ Verify there's no interference with a HA table (must keep 1'' gap in between).
□ Mounting Style (Wall Panel for Overhead Cabinet or Wall Mounted).
□ Depth is the same as the Secondary Desk under which it is installed.
□ Position (Center or End with the appropriate thickness).
□ In Front of Height-Adjustable Mechanism (Yes or No).
□ Make sure there is no interference with HA surfaces.
□ Surface thicknesses must be constant in each project (D-1’’, M-1 3/16’’, X-1 9/16’’).
□ Validate that every chosen dimensions match with each other by looking at the 3D drawing.
23
CLICK HERECLICK HERE TO ACCESS THE FULL SPECIFICATION COURSETO ACCESS THE FULL SPECIFICATION COURSE
ABOUT EXPANSION CASEGOODS AND DEEPEN YOUR KNOWLEDGE! ABOUT EXPANSION CASEGOODS AND DEEPEN YOUR KNOWLEDGE!
24
Julien Beaulieu
Product Specialist – Expansion
[email protected]
418.833.8301 x4172
25
teknion