Tools required: Phillips screwdriver
Note: These instructions are intended for various models and congurations. Your product
may not look exactly as shown in the diagrams.
Important: Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
1. Unpack and identify parts. Proled edges of
tabletop face front and back.
2. Assemble chairs individually according
to chair instructions. Arms with table bolt
inserts must be oriented to face each other
when chairs are adjacent.
3. Place the tabletop upside down on a soft,
clean surface to prevent scratches.
4. Attach slotted brackets to tabletop using
bolts into threaded inserts, as shown in
gure 1. Be sure brackets are ush with
edge of tabletop. Keep bolts slightly loose
for now.
5. Position chairs about 2 feet apart. Arms with
table bolt inserts must face each other.
6. Insert bolts about halfway into bolt inserts in
facing arms, as shown in gure 2 closeup.
7. Set tabletop between chairs. The slotted
brackets should slide onto the bolts from
step 6.
8. Press down on tabletop until arm bolts
are fully inserted into the bracket slots, as
shown in gure 3. Tighten all bolts securely,
including bracket bolts from step 4 and arm
bolts from step 6.
9. Your product is now assembled and ready to
use.
© 2013 Lesro Industries, Inc. Feb 2013
Assembly Instructions
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Parts List
Tabletop
Slotted Brackets, 4 pcs.
¾” Phillips Bolts, 8 pcs.
Figure 1
Figure 3
Brackets
ush to edge
Figure 2
Insert bolts
into arms
Proled edge
Proled edge
Connecting
Center Tables
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
© 2013 Lesro Industries, Inc.
1. Unpack and identify all parts.
2. Assemble chairs individually according to chair
instructions. Arms with table bolt inserts must be oriented
to face each other when chairs are adjacent.
3. Attach leg plate to table leg using Phillips bolts into
threaded inserts, as shown in gure 1. Tighten securely.
4. Place the tabletop upside down on a soft, clean surface to
prevent scratches.
5. Attach leg to tabletop using Phillips screws through leg
plate into pre-marked holes, as shown in gure 2. Tighten
securely using care not to strip.
6. Attach slotted brackets to tabletop using bolts into
threaded inserts also as shown in gure 2. Be sure
brackets are ush with edge of tabletop. Keep bolts
slightly loose for now.
7. Position chairs about 2 feet apart, oriented as shown in
top diagram. Arms with bolt inserts must face each other.
8. Insert bolts about halfway into bolt inserts in facing arms,
as shown in gure 3 closeup.
9. Set tabletop between chairs, also as shown in gure 3.
The slotted brackets slide onto the bolts from step 8.
10. Press down on tabletop until arm bolts are fully inserted
into each of the bracket slots, as shown in gure 4. Be
sure back leg of table is resting on oor during this step.
Tighten all bolts securely.
11. Your product is now assembled and ready to use.
Feb 2013
Parts List
Tabletop
Table Leg & Leg Plate
Slotted Brackets, 4 pcs.
¾” Phillips Screws, 2 pcs.
¾” Phillips Bolts, 10 pcs.
Tools required: Phillips screwdriver
Note: These instructions are intended for various models and congurations. Your product
may not look exactly as shown in the diagrams.
Important: Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Assembly Instructions
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Figure 2
Figure 4
Brackets
ush to edge
Figure 3
Insert bolts
into arms
Figure 1
Leg Plate
Connecting
Corner Tables